1 / 2
Backing Plate for Xin Dian Vise for Carvera 4th Axis — zdjęcie 1
1 / 2

Backing Plate for Xin Dian Vise for Carvera 4th Axis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

4th axis backing plate for a self centering vise. It enables holding aluminum plate and bar stock very rigidly

Ocena
5 / 5
Polubienia
17
Pobrania
143
Wydruki
3
Wyświetlenia
1097
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The design makes use of the 4 x 9mm pins for alignment. The pin holes are modeled with a very tight fit (0.05mm clearance), adjust as necessary. 

The center hole needs to be precision threaded M14x1.00. Any deviation off centre will render the adapter plate useless.It's modeled with a 12.5mm diameter hole, and it's expected that you thread mill or tap it.  

I didn't design any adjustability since the vise comes with pins, and I had previously worked out how to thread mill m14x1. you probably could skip the pins and make the m5 mounting holes oversized and that would give you some amount of adjustment.

Here is the vise that this backing plate is designed for: https://www.aliexpress.com/item/1005004706250843.html

A more polished iteration of this design is available as a ready-to-use item on my shop: https://serge.industries/products/carvera-4th-axis-vise-76094

 

Tagi