pen ploter with ender v3 se/ke
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this converts 3d printer(ender v 3 se/ke) into pen ploter
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 608
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a attachment that turns your ender 3 v3 se/ke into a pen plotter. It clips on to the side of the extruder and requires no disassembly of the printer toolhead.
It's fairly rigid and can plot fine details (e.g. printed text) with a fine tip ball-point pen.
You'll need
- 5x M3 threaded insert (max 4mm deep)
Toolhead Clip and Spring (if not using a rubber band) should be printed in PETG or better. I got good results with 0.15 mm layer height and 5°C above the default temperature. Other parts can be printed in PLA, though ymmv.
You can print multiple carriages & pen clips to quick swap the pens for multi-color plots.
You'll need a paper attached securely onto the print bed (e.g. with strong magnets).