pen ploter with ender v3 se/ke
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.83 – €1.02 net (excluding VAT)
For file: pen hol_PLA_1h5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.92 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
this converts 3d printer(ender v 3 se/ke) into pen ploter
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 99
- Makes
- 0
- Views
- 619
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a attachment that turns your ender 3 v3 se/ke into a pen plotter. It clips on to the side of the extruder and requires no disassembly of the printer toolhead.
It's fairly rigid and can plot fine details (e.g. printed text) with a fine tip ball-point pen.
You'll need
- 5x M3 threaded insert (max 4mm deep)
Toolhead Clip and Spring (if not using a rubber band) should be printed in PETG or better. I got good results with 0.15 mm layer height and 5°C above the default temperature. Other parts can be printed in PLA, though ymmv.
You can print multiple carriages & pen clips to quick swap the pens for multi-color plots.
You'll need a paper attached securely onto the print bed (e.g. with strong magnets).