3-Pack - Blackmagic micro and mini converter protectors, for USB and barrel connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Standard Digital File License
Prevent Damage to Your Blackmagic Converters with This Strain Relief
there are 3 separate models. to fit the most popular converters.
Keep your Blackmagic Design converter secure and fully functional with this specially designed cable strain relief. No more loose connections or accidental disconnections!
This strain relief effectively prevents USB cables from falling out or being pulled out unexpectedly. Designed for a perfect fit, it securely holds the USB-C or barrel connector in place. Since the original screw is too short, you'll need an M3x8mm or M3x10mm screw. While there are no components near the screw hole, ensure the screw isn’t too long to avoid damaging the converter.
Important note: You need the original USB-C charger or Barrel cinnector charger for this to fit.
Print Settings
These models are designed for support-free printing. The BiDirectional model includes a built-in ridge that acts as a support and detaches easily, so you can disable supports in your slicer. Because the converters get hot easily, you need to print the models in PETG, ABS, ASA or an other material that can withstand higher temperatures.