P
Printables
BTT HDMI7 Corner Mount for Ratrig Vcore 4
Very good instructions from Dave Wilson. Thank you. https://www.printables.com/make/2339640?comment_id=2339640
Wyniki wyszukiwania: hdmi
Liczymy pasujące modele…
P
Printables
Original Sega Dreamcast DCHDMI Drill Template Block
Uploading here as it took me a fair while to find it! Useful if/when moving a DCHDMI enabled console from one shell to another and need to drill a new HDMI port opening. This block is for the original DCHDMI board. I believe it is also…
P
Printables
HDMI5 Skirt for Voron with Clicky-Clack Fridge Door
Moved the display to the front when Clicky-Clack Door is installed. Otherwise parts of the display are invisible below the new 2020 profiles of the door. Add an extra 1mm to ensure the door can move freely.
P
Printables
10.1 HDMI display case for DFRobot display
UPDATE: added the mounting plates This is the Thai Makerspace pipe clamp I referred to: https://www.thingiverse.com/thing:3161549 although I use this one for light jobs like this: 25mm Pipe Clamp This case was specifically designed for…
P
Printables
Sony PlayStation 2 FAT HDMI and USB-C Mod Cover
This custom cover is made specifically for the Type-C PD and HDMI mods to perfectly fit the PS2 Fat model (tested on the 5xxx series). 🛠 Key Features : Designed for this PD trigger : AliExpress PD trigger . Made for this HDMI mod :…
P
Printables
Sovol SV08 HDMI Screen Holder for Mutiboard
I printed this in PLA with 3 walls and 15% infill.
P
Printables
3.5" Micro HDMI display case
This is a simple friction-held case for a generic 3.5" micro-HDMI LCD display (640x480px), its controller (LQO35NC111-1HDMI+1AV PCB800850) and protective glass (RG3503-HC). It should stay together with friction alone (as seen on the…
P
Printables
BTT HDMI5 Case
Wanted a decent case for the HDMI5 touch screen, and as I couldn't find something to fit my needs, made my own. Screen is fully encapsulated, and has brackets to mount to any slot extrusion frame, like the Bear2.1 I'm using mine on. Also…
P
Printables
HDMI Pen Holder for 16" Lenovo Yoga 7i
Holds a Lenovo pen (9.65mm diameter) in the HDMI slot of a 16" Lenovo Yoga 7i (2025)
P
Printables
BTTpi Case + BTThdmi5 voron mount
Attach the mount bracket to the top of the pi case with 4 m3 screws and nuts. Check which version of the HDMI5 you have
P
Printables
Mi TV Stick HDMI Port Dust Cover (with/without Grip)
Basic cap for HDMI port of Mi TV Stick. Easy solution for dust. Sliced using Cura with standart quality preset. Printing with Ender-3 V2 Neo takes around 20 min. See results with translucent PLA filament. Matte black filament with little…
P
Printables
5" HDMI display stand
Small 5" HDMI display stand with 45 degrees tilted for better reading while it stands on desk.
P
Printables
BigTreeTech HDMI5 V1.2 Case for the Sovol SV08 - Stock Mount + Open Enclosure Compatible
I have seen quite a few mounts for the HDMI5 from BigTreeTech designed for the Sovol SV08, however, most of the ones I have tried would prevent me from opening or closing the doors for my official Open Enclosure , or hung well below the…
P
Printables
Wall mount bracket for Orei 1x2 HDMI splitter Model HD-102
Easy to print , enable support. I print my brackets always with 100% infill but it may be overkill. The OREI HDMI splitter model is HD-102 available on Amazon for 20 CAD:…
P
Printables
Boitier écran HDMI 7 pouces
Bonjour, Voici un boitier pour intégrer un écran HDMI 7 Pouces de ce type qui est parfait pour faire un retour caméra pas cher Une petite vidéo de présentation sur YouTube Boitier modélisé sur FreeCAD que je fourni si vous souhaité le…
P
Printables
Ford F150 (2009-2014) USB-C and HDMI SYNC cover
This is a mount to house a USB-C and HDMI adapter instead of the Aux and USB-A that comes stock. I designed this to fit the USB-C cord that came with the Sony XAV-AX6000 Head unit. I used this HDMI cord from amazon:…
P
Printables
Raspberry Pi 4B & Waveshare HDMI Adapter Case
Simple case built around the RPi 4B and Waveshare micro HDMI to HDMI Multi-functional Adapter. Uses 4 x M2*16 screws & nuts to hold the two halves of the case together. The M2 nuts need to have a socket size of 4mm to fit into the recess…
P
Printables
Anycubic i3Mega HDMI 7" Display Housing
This Model provide the ability to mount a 7Inch HDMI touch display from mellow ( https://de.aliexpress.com/item/1005008090227343.html ) to a raspberry running the klipper firmware or octoprint. The pushbuttons are exposed to be able to…
P
Printables
Universal 7-inch HDMI Touchscreen Case - Slim Sandwich Design (M3)
Description This is a custom-designed, sleek, and protective case for the popular 7-inch HDMI LCD monitors often found on AliExpress and Amazon. The case uses a "Sandwich" construction , where the screen is securely clamped between the…
P
Printables
Sovol SV08 Max 150mm ZZ Tophat - BTT 7 inch HDMI 1.2
This is an addon to the Sovol SV08 Max 150mm ZZ Tophat The addon is a replacement corner that adds the holder for the BTT 7 Inch ver 1.2 screen. This model uses 8x4mm inserts for the fans all other holes do not and are just printed…
P
Printables
7" HDMI Display Mount
7-inch HDMI display mount designed for the Ender 3 frame with 2020 aluminum extrusion. The holder mounts directly to the 2020 profile using standard T-nuts and screws, no frame modification required. Suitable for Klipper, OctoPrint, or…
P
Printables
Sovol SV08 BigTreeTech HDMI5 V1.2 Case
I have change the bottom for the orignal BigTreeTech cables
P
Printables
ProosaXY BigTreeTech HDMI5 Mount
I used the bottom set of holes and added an M3 heat shrink insert. Then, I used M3 screws to fasten one Prusawire mount to the left side and this mount to the right side. These mounts attach to the Prusa frame plate on the front of the…
P
Printables
Rack mountable front for Generic Aliexpress 7" HDMI Display-C Case (Remix)
I printed this remixed model to put the display in it, but plans changed, and I wanted to put the display in a 10" rack, so modified the height and width of the model, and got holes for the screws. It is 3U high. Because of the ports and…
P
Printables
Holder for Remote for KVM Switch TESmart TripleHDMI 4 PC ports
Simple holder for the remote for a KVM switch made by TESmart. See pictures for details. With space for doublesided adhesive on the back. With holes for easier cleaning.
P
Printables
Raspberry 5 NVME full HDMI Case
This is a case for a Raspberry 5 + NVMe and full size HDMI adapter It will fit the following Adapter boards: 52Pi Micro HDMI to HDMI Multifunctional Adapter for Raspberry Pi 5, with PCIe 3.0x1 M.2 slot, Support M.2 NVMe SSD 2230 2242…
P
Printables
Mellow FLY HDMI7 mount for Ikea Hejne
Attach a Mellow FLY HDMI7 securely to an Ikea Hejne shelf. Needed supports base needs no supports frame needs supports for cutouts mount may need supports for screw-head cutouts Needed Hardware 2pcs M3 x 30mm (mounting screen, with base…
P
Printables
Waveshare 5.5" 2k HDMI Mercury One.1 Mount
This is a quick remix of the excellent Waveshare 5.5 mount by @SergeiDubovsk_507856 to work with my Zerog Skirt pass though. In my version the side and bottom USB holes are closed off, but if you'd prefer to use the original version it…
P
Printables
Wavershare 5" HDMI Mercury One.1 Mount
Have you ever wanted to use a 5" Waveshare HDMI screen on a mercury one but found that you had to compromise between how far it sticks out and and how tall the skirt is? No? Just me? This is the first case I made with the intention of not…
P
Printables
Xbox Series X HDMI Protector
I've had the HDMI port get bent and even need to be replaced on my Xbox Series X console. This happens because the HDMI cable can be hit or snag and get pulled up or down when the console is vertical. This 3D print clips in-place on the…
P
Printables
HDMI-Plug protection
It's a simple HDMI plug protector that fits perfectly. It was printed with PLA. Because it's not very thick, the PLA allows for a bit of tolerance.
P
Printables
Manfrotto 645 Fast Twin Halterung Redstar24 HDMI Splitter
Eine Halterung für den Manfrotto 645 Fast Twin stativ, um den Redstar24 HDMI Splitter daran zu befestigen.
P
Printables
HDMI-CSI-2 Adapter Case for PIVKM (TC358743XBG, blue board)
Uses 4 M2 12mm hex socket screws to secure the lid. Print with snug normal supports.
P
Printables
VORON 2.4 Stealth Skirts - Cheese Grater & Honeycomb Version Display Mount BTT HDMI 5 Inch
customized display mount for the btt hdmi 5 inch
P
Printables
SSUPD Rear Displayport/HDMI Faceplate
Rear faceplate with DP and HDMI as requested on Reddit. Category: Other
P
Printables
Arducam OV5647 + HDMI-CSI Adapter camera arm
Couldn't find any mounts for this combination, so made my own. Holds an arducam ov5647 and an HDMI-to-CSI adapter board on the back using standoffs. Uses M3x8 screws on the joints, mounts to extrusion using an M5 screw (allows for…
P
Printables
7 Inch HDMI LCD monitor case
Case for a KD070V02 7 inch LCD monitor I got on AliExpress. 2 versions for the front. One uses M3 threaded inserts and the other you just screw directly into the plastic using M3 screws. https://www.aliexpress.com/item/1005006428560580.html
P
Printables
voron btt hdmi5 v1.2 screen mount
they added a speaker/moved connectors which interfered with mount
P
Printables
Wall Mounting Frame for LINDY HDMI Switch
To use this mounting frame remove the original case screws from the HDMI switch and replace them with some that are 2mm longer, such that you can attach the mounting frame with the cover to the base. For printing the precise settings…
P
Printables
Andonstar HDMI Microscope Ring Light Adapter
Specifically for the AD246S-M with the "A" lens, but I'm sure it will work on other microscopes as well, or with the other lenses.
P
Printables
Sovol SV08 Top Extention lit BTT display hdmi 5 inch 1.2 mount
I used support 25% infill https://biqu.equipment/collections/lcd-screen/products/bigtreetech-hdmi5-v1-0-hdmi7-v1-0
P
Printables
HDMI + Displayport Dongle Holder
This holder has storage for 5x HDMI and 5x Displayport dongles/plugs.
P
Printables
HDMI5 V1.5 Case
V2 improves the operation of compliant buttons and allows more room for the screen. V1 compliant button work poorly or not at all. I am working on a mount for the case so you can put it on either side of the printer. The threads of v1 are…
P
Printables
BTT HDMI5 V1-2 mount bracket for SIBOOR Trident and Clicky-Clack Fridge Door
Compatible with SIBOOR's Voron Trident kit and Clicky-Clack Fridge Door.
P
Printables
Cursed Connectors: H2O to HDMI Adapter
Introducing the first in my Cursed Connectors series: the H2O to HDMI Adapter! This 3D printed garden hose to HDMI adapter is the ultimate powerful streaming solution. Dispense high bandwidth water with this cutting-edge adapter. Design:…
P
Printables
BTT HDMI 5 V1.2 Ender 3 mount
Case for BigTreeTech HDMI5 display V1.2 with outlets to the back for Ender 3 (probably more ender models) 06-09: fixed the notch inside, screen has a tight fit, 4x screw advised to mount the back panel
P
Printables
Omnibox BTT HDMI thicker panel
Had a bit of a problem with space for HDMI and USB C to power BTT HDMI5, so I came up with a "dirty" and quick fix.
P
Printables
Pi 400 Screen Holder for Waveshare 7'' HDMI Display
A screen holder to mount a Waveshare 7'' display to the Raspberry PI 400. Uses the bracket created by vman81 here: https://github.com/vman81/pi400-mount/ On the back you can see glued my WD SSD holder, it's available separately. What you…
P
Printables
BIQU HDMI5 V1.2 Case
UPDATE 05Nov2024: Hopefully the changes I made to v1.2.1 address the issues in the comments. Case for the BIQU/ BTT HDMI5 V1.2 touchscreen. BTT released V1.2 of the HDMI5, which moved the outlets to the rear of the screen and added a…
P
Printables
HDMI cover
HDMI cover for back plates without HDMI… Printed with 100% infill and using TPU 82A
P
Printables
OpenIPC Radxa Zero 3W HDMI ground station
Self-locking (no screws needed to close it). WiFi module USB connector is hidden inside the box (no dangling wires), but requires modified (5.1k resistor) "MX-12" 90° USB-C connector. Radxa and cooler are screwed with M2 bolts (5mm for…
P
Printables
BTT HDMI7 Corner Mount for Ratrig Vcore 4
Very good instructions from Dave Wilson. Thank you. https://www.printables.com/make/2339640?comment_id=2339640
P
Printables
Case AIDA64 SensorPanel 7" HDMI
Bring ultimate monitoring to your computer with the AIDA64 SensorPanel 7" HDMI. This high-quality 7-inch IPS display with a resolution of 1024x600 pixels and HDMI input allows you to monitor all critical system information in real-time.…
P
Printables
Dust cover - HDMI and Display Port
Plugs for Display Port or HDMI ports that are easy to unplug, secure, uniform and looks tidy on your computer case. Designed for 3d print so no overhang ! Print with the seem on a flat side so you can clean up the bump easily (see…
P
Printables
Desktop case for Waveshare 7" HDMI display
I previously hung this display on my Skadis, but had to take it down. This model is designed so that the display can be used as a touchscreen on a desk. The display case and dock are separate, and you can easily print your own dock for…
P
Printables
RGBToHDMI Case for Buffered TTL Video / CGA / C128
A case for an RGBToHDMI with the optional TTL Buffer Board and DB9 TTL video input. Designed for resin printing but FDM may be possible. You will need: A Pi Zero An RGBToHDMI…
P
Printables
7 inch 1024x600 hdmi display stand
This modeI i made it myself, as you can see i have no skill in 3d arts but it gets the job done. You have to drill the holes for the main board, or you can use double sided tape. I used Double sided tape to attach the screen to the base…
P
Printables
Original Sega Dreamcast DCHDMI Drill Template Block
Uploading here as it took me a fair while to find it! Useful if/when moving a DCHDMI enabled console from one shell to another and need to drill a new HDMI port opening. This block is for the original DCHDMI board. I believe it is also…
P
Printables
6x8 Frame for 7" HDMI-C Touch Monitor
Youll want to print it thicker, maybe like 2.5mm ? if you dont use the glass (so you can use touch) I didnt use touch so I kept the glass in front and used hot glue to secure everything, and glued the original stand back onto the back. a…
P
Printables
HDMI MP-like box for Amstrad CPC 464/664/6128
MP-like box for Amstrad CPC 464/664/6128. Featuring SCART-to-HDMI converter and 5V power supply. In order to build one you will need : Soldering iron + basic soldering/desoldering skills Female IEC plug Scart-to-HDMI converter. The very…
P
Printables
Micro HDMI (Type D) Port Dust Cover
A dust cover for micro HDMI ports. Made with the female port from the following link as a reference: https://grabcad.com/library/micro-hdmi-connector-female-type-d-1 Just slots into a micro HDMI port to cover it up. I'm using it on a…
P
Printables
Sovol SV08 Display Mount for the 7 inch Raspberry HDMI Touch Screen
Ive made a Display Holder for a 7 inch HDMI Touch Screen. Print it in PETG or in ABS. Ive used this Display Frame from here, THX to @Darragh: https://www.printables.com/model/10886-elecrow-7-inch-lcd-screen-case-no-gluing-required You…
P
Printables
RatRig BTT HDMI 5 screen mount
Used on the RatRig V-core 4 500. When rear mounted the original BTT cables can be used. The display holder requires two M4x5mm screws that I threaded into to plastic and / or glue. This is made so it is easier to print, but maybe I will…
P
Printables
HDMI Splitter Holder (HDMI Çoklayıcı Kutusu)
EN Hdmi splitter holder. Hdmi splitter box. Designed for the product in the picture. TR Hdmi çoklayıcı tutucu. Hdmi çok
P
Printables
Hdmi Strain Relief
HDMI strain relief for Pc's laptop's, anything electronic! I mad ethis because my laptop's hdmi cable would always black out randomly whenever I brushed up against it, especially when I pushed down on it, and with this I haven't had any…
P
Printables
BTT HDMI 5' Case
The enclosure for the BTT HDMI 5 display consists of four precisely manufactured parts that provide solid support and protection for the device. It can be mounted in two ways: either by screwing it to an aluminum profile or by permanently…
P
Printables
HDMI5 Display Bracket
A bracket to mount the BigTreeTech HDMI5 display to the left side of a Ratrig V-Core 4. The main bracket can be mirrored to mount the display on the right side instead. BOM In addition to the two printed parts, you will need: BigTreeTech…
P
Printables
Case RaspBerry + HDMI 5"
All-in-one case box to hold your Raspberry and 5-inch HDMI display all together. The FEET fit into the back with an angle of 55°. ASSEMBLY INSTRUCTIONS: To fix the raspberry we must insert 4 M2x15 screws from the inside of the BOTTOM .…
P
Printables
BTT HDMI5 Mount for the Clicky-Clack Fridge Door with the stealthchanger Door Buffer V2
A modified version of @DETMan's BTT HDMI5 Mount for Clicky Clack Door for use with the stealthchanger Door Buffer. Print with normal voron settings.
P
Printables
PiKVM Case (Pi4 + USB-C Splitter + ATX + OLED + CSI HDMI)
PIKVM case supporting the Raspberry Pi4, USB-c power/hid splitter, RJ45 ATX connector, and a 0.96" OLED display
P
Printables
Sovol SV08 BTT HDMI5 v1.2 Tilt Display Mount
None of the offerings on printables so far, prints without significant support or needs an extremely tuned machine. Great designs that are relatively easy and reliable to print, don't come in version that supports v1.2 screens or are not…
P
Printables
HDMI5 Skirt for Voron with Clicky-Clack Fridge Door
Moved the display to the front when Clicky-Clack Door is installed. Otherwise parts of the display are invisible below the new 2020 profiles of the door. Add an extra 1mm to ensure the door can move freely.
P
Printables
BTT HDMI5 V1.2 Mount for my Voron 2.4 Canopy
So you wanted a place to put your 5in screen up higher or your Voron 2.4. Now you can if you have my Voron 2.4 Canopy. Will need a BTT HDMI5 V1.2 with the cables coming out the back. You will also have to remove the speaker on the back by…
P
Printables
BTT HDMI5 V1.2 Stealth Skirt Mount
A search for Stealth Skirt HDMI5 mounts didn't turn up any results that worked with the speaker and jack placement of the v1.2 board. Brightness adjustment buttons on the board can be accessed through access holes with a paperclip or…
P
Printables
BTT HDMI7 mounted vertically on 2020/3030 extrusion
I needed to place my BTT Hdmi7 on the side of my enclosure, so I made this remix of the very nice case made by @ Artxime . There is a version for both 2020 and 3030 extrusions. I also added some holes for zip ties. Insert the zipties…
P
Printables
Vewlix USB/HDMI Patch Panel
Patch panel to bring USB and HDMI connectors to the front of a Vewlix arcade cabinet to make it easier to swap between systems. I've created labels for various systems that can be swapped out on the fascia depending on what's being used…
P
Printables
HDMI splitter clamp for Samsung (and other) monitor
HDMI splitter clamp for Samsung monitor. It is easy to adopt to other monitors as the clamp is in two parts. One HDMI splitter specific. Use a M3 bolt and nut to join the parts. AliExspress and many others sell this HDMI splitter
P
Printables
BTT HDMI 5" Display (Portrait or Landscape) Sovol SV06 and SV06 Plus on Steroids
Upgrade Your Sovol SV06/SV06 Plus Displays We're excited to announce three versatile display options to enhance your Sovol SV06 and SV06 Plus 3D printers. the design includes a front cover , back cover , and mount , all designed for a…
P
Printables
BTT HDMI 5 Display with mount on 20x20 profile
Link to others files: https://www.printables.com/model/861544-btt-hdmi-5-display-voron-mount-works-with-clicky-c
P
Printables
1U Gana 5in1Out HDMI switch mount
Rack mount for Gana HDMI switch. The half offset version also has a recess to fit over the ear of the shelf It mounted over so they can share a screw hole. Note: I have only printed and tested the half offset version as I needed it to sit…
P
Printables
pikvm - pi zero 2w case with hdmi csi bridge (waveshare)
just like in the original, to get the honeycomb pattern I've adjusted my slicer settings to: wall loops: 5 top shell layers: 0 bottom shell layers: 0 sparse infill density: 25% sparse infill pattern: honeycomb feel free to stack and…
P
Printables
Arducam HDMI for Prusa Enclosure
I created a CSI/HDMI adapter port for my Prusa enclosure and a Raspberry Pi camera Print instructions printed with PET and 0.15mm layer height
P
Printables
RatRig VCore4 BTT HDMI7 Mount on side of enclosure
This mounts to the side of the 400 mm enclosure with M6x16 socket head screws, through the existing holes. Use 4 M3x8 screws and M3 heat sinks for the side of the panel. I didn't like the buttons on the earlier models, so this uses…
P
Printables
Voron Trident BTT HDMI 5 Fold Out Screen
What is this? This is a folding mount that allows you to change the angle of the BTT HDMI display or collapse it flush with the frame when using Flat Mesh Skirts on your Voron Trident. The hinge uses a novel constant friction design to…
P
Printables
BTT HDMI 7 v1.2 case
Case for BTT HDMI 7 v1.2. The included mounting bracket is pretty custom. I recommend using the bracket and arms from the official Voron github.…
P
Printables
10.1 HDMI display case for DFRobot display
UPDATE: added the mounting plates This is the Thai Makerspace pipe clamp I referred to: https://www.thingiverse.com/thing:3161549 although I use this one for light jobs like this: 25mm Pipe Clamp This case was specifically designed for…
P
Printables
BTT HDMI5 V1.2 Stealth Skirt Mount for Clicky-Clack door
Remix of “ BTT HDMI5 V1.2 Stealth Skirt Mount” to add 20mm of depth to work with the clicky-clack door system.
P
Printables
Side mount for SOVOL brand SV08 HDMI touch screen
Drill two holes 30mm apart vertically in the right front corner vertical support. IMPORTANT NOTE: Make sure to drill holes so bolt heads will be in the center of the belts and mount the bolts from the INSIDE OUT so they don't hit the…
P
Printables
BTT HDMI5 1.2 Mount for Troodon 2.0 Pro
Mounts to the front of the printer where the original magnetic bracket goes. The screen that came with my printer suddenly died one day (likely due to the strong magnets placed directly behind it) and Formbot sent me the updated model as…
P
Printables
PiKVM Rackmount with ezcoo 4-Port HDMI Switch
I found the rackmount from “cjdawson_com” interessting and build it myself. I had a few problems with the keystones not holding correctly. So I merged the Keystone Panel Mount from “M” with the original model and also added a few extra…
P
Printables
Book Case for Raspberry Pi 5 (Rpi5), Active cooler, 2 SSDs, and full-HDMI
(This is the thicker Dual SSD version of my Book Case. I have also published a slimmer Single SSD version.) I wanted a good case for traveling and taking my Plex Media Server with me. My requirements for this case: All Ports on One Side 2…
P
Printables
Book Case for Raspberry Pi 5 (Rpi5), Active cooler, 1 SSD, and full-HDMI
(This is the slimmer Single SSD version of my Book Case with the little SSD on top. I have also published a thicker Dual SSD version.) I wanted a good case for traveling and taking my Raspberry Pi 5 for tinkering. My requirements for this…
P
Printables
Orei HDMI Matrix Remote Holder
A holder for the remote from an Orei HDMI matrix. Built for a 6x4 matrix extender but it may work for other models. Used to mount the remote on the wall using short command strips.