1 / 4
Fractal North Pi Case - Rear IO with Full Size HDMI — zdjęcie 1
1 / 4

Fractal North Pi Case - Rear IO with Full Size HDMI

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Taller North Pi case with all IO at the rear

Ocena
5 / 5
Polubienia
38
Pobrania
216
Wydruki
4
Wyświetlenia
1727
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I loved the North Pi and was grateful that Fractal released stl files.
My only issue with it was that all of the IO was at the top.

I have recreated the design and updated it to support a Waveshare.com pi5-connector-adapter (27009) for full rear IO.

The IO shield is designed for a Pi 5 but can easily be modified to support a Pi 4 with the same Waveshare board.

The front wood bars were redesigned with a wooden texture.
I print them with Hatchbox Wood PLA and stain it with walnut.
The bar print files are available in 3 different texture depths to use based on your print quality.
If not staining the bars, I find the 0.5 to be the best.
If staining, I prefer the 0.2.
The 1.0 version works great if sanding the surface down a bit before staining.

The main components were printed with 0.2mm Standard Profile with tree supports.
Wood bars printed with 0.08mm Extra Fine profile on their side with standard supports.
All printed on a Bambu X1C.

The case still follows all other parts and instructions from Fractal.
It supports 2 - 40x40x10 fans.
You will need 17 - M2.5x4mm heat inserts and screws.
The front panel can be cut from 2mm acrylic or a CD jewel case.

Interactive 3D view available here.


Post a make if you print it!

Tagi