Sovol SV06 BTT HDMI 5 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for BTT HDMI 5 screen for the Sovol SV06
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 246
- Wydruki
- 0
- Wyświetlenia
- 2520
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a similar mount to the BTT TFT50 display on the SV06 however they use different connections and mounting and size, and I wanted to make sure the footprint was not going to go crazy on the horizontal position its only between 12 and 15mm wider than the stock mono lcd. I remixed the BTT HDMI 5 Voron v2 model and the mount from the SV06 BTT TFT50 mount for the HDMI 5 LCD.
I added additional support to make it sturdy, and added a simple inset logo using Fusion 360 for the models and Tinkercad for the txt. No additional hardware needed other than the screen. Part printed in my Voron Trident 250 in KVP Stellar back abs 4 perimeters, 5 top and bottom layers at .20 layer height with supports printed logo down.
To mount just unscrew the two existing posts so they can go past the printed holes but not come out, mount the screen mount and tighten them back down so the wider head acts as a washer. No additional hardware needed.