1 / 8
Stay-on Reusable Cable Tie in TPU. For USB, HDMI, DP, UTP and Power cables and more — zdjęcie 1
1 / 8

Stay-on Reusable Cable Tie in TPU. For USB, HDMI, DP, UTP and Power cables and more

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

One year of testing – my best TPU cable tie yet!

Ocena
5 / 5
Polubienia
1022
Pobrania
3458
Wydruki
38
Wyświetlenia
11 596
Oceny
41

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

It’s my Reddit cake day, and I’m finally sharing something I’ve been using for almost a year: my custom-designed, reusable TPU cable ties.

After trying dozens of designs, none of them quite hit the mark. I wanted a cable tie that:

stays on the cable when not in use

locks securely but is easy to release

prints fast with minimal filament, and

works with flexible filament like TPU

So I designed one from scratch — and after a year of use across USB, HDMI, UTP, and power cables, this design has proven itself.

FEATURES:

Stay-on loop: Attach it once to the cable and it stays with it

Angled locking tab: Slides in easily, holds tight, but still releases smoothly

Flexible & efficient: Works great with TPU; small version uses just 1.22g filament

No supports or brim needed

 USB CABLE TIES:

Model nameMax bundle circumference
CableTie_USB_70mm.stl70 mm
CableTie_USB_90mm.stl90 mm

For USB and other thin cables

THICK CABLE TIES:

Model nameMax bundle circumference
CableTie_ThickCable_140mm.stl140 mm
CableTie_ThickCable_190mm.stl190 mm
CableTie_ThickCable_280mm.stl280 mm
CableTie_ThickCable_300mm.stl300 mm

For HDMI, UTP, and power cables

⚠ Note: The number in the filename refers to the maximum cable bundle circumference the tie can handle, not the tie’s physical length.

PRINT SETTINGS:

Material: TPU or another flexible filament (required)

Slicer settings:

Layer height: 0.2 mm

Walls: 2

Top layers: 5 (Monotonic Line)

Bottom layers: 3 (Monotonic)

Infill: 15% Gyroid

Avoid crossing walls: ✅

Supports / brim: ❌ Not needed

Tagi