Stay-on Reusable Cable Tie in TPU. For USB, HDMI, DP, UTP and Power cables and more
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One year of testing – my best TPU cable tie yet!
- Rating
- 5 / 5
- Likes
- 1,028
- Downloads
- 3,512
- Makes
- 38
- Views
- 11,698
- Reviews
- 42
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It’s my Reddit cake day, and I’m finally sharing something I’ve been using for almost a year: my custom-designed, reusable TPU cable ties.
After trying dozens of designs, none of them quite hit the mark. I wanted a cable tie that:
stays on the cable when not in use
locks securely but is easy to release
prints fast with minimal filament, and
works with flexible filament like TPU
So I designed one from scratch — and after a year of use across USB, HDMI, UTP, and power cables, this design has proven itself.
FEATURES:
Stay-on loop: Attach it once to the cable and it stays with it
Angled locking tab: Slides in easily, holds tight, but still releases smoothly
Flexible & efficient: Works great with TPU; small version uses just 1.22g filament
No supports or brim needed
USB CABLE TIES:
| Model name | Max bundle circumference |
|---|---|
CableTie_USB_70mm.stl | 70 mm |
CableTie_USB_90mm.stl | 90 mm |
For USB and other thin cables
THICK CABLE TIES:
| Model name | Max bundle circumference |
|---|---|
CableTie_ThickCable_140mm.stl | 140 mm |
CableTie_ThickCable_190mm.stl | 190 mm |
CableTie_ThickCable_280mm.stl | 280 mm |
CableTie_ThickCable_300mm.stl | 300 mm |
For HDMI, UTP, and power cables
⚠ Note: The number in the filename refers to the maximum cable bundle circumference the tie can handle, not the tie’s physical length.
PRINT SETTINGS:
Material: TPU or another flexible filament (required)
Slicer settings:
Layer height: 0.2 mm
Walls: 2
Top layers: 5 (Monotonic Line)
Bottom layers: 3 (Monotonic)
Infill: 15% Gyroid
Avoid crossing walls: ✅
Supports / brim: ❌ Not needed