1 / 2
Generic Aliexpress 7" HDMI Display-C Case (Remix)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slightly adjusted this model to fit a generic 7 inch Aliexpress touchscreen.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 347
- Wydruki
- 0
- Wyświetlenia
- 1328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (1)Kolekcje (21)Powiązane
Adjusted this excellent model to fit this generic 7 Inch LCD touchscreen from Aliexpress - specifically the IPS version.
7 Inch Raspberry Pi 4/3/2/B/B+/A+ Monitor 1024x600 IPS 5-Points Capacitive Touchscreen Drive Free HDMI Display For Win 7/8/10
- Removed internal protrusions which would interfere with surface mount components (components are in different positions).
- Increased space for the “tabs” of the PCB's backplane - original model was just a little too tight for the tabs to slot into place.
- Increased the slot size on the side to fit the extra USB ports.
- Moved cutout for power switch.
- “Pushed through" the diamond airflow holes on the bottom, so the holes actually allow ventilation (previously there was a single line's worth of filament blocking the cutout - not sure if this was intentional).
Front panel + stand remain unchanged.
Only caveat is that the VESA mounting points no longer have a protective “back” - I personally wouldn't risk using these screw holes, as you may accidentally screw too deep (heh) and damage the surface mount components on the back of the PCB.