1 / 3
ADT-Link UT3G USB4 eGPU+SFX stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple stand for an SFX PSU and eGPU with space to route cables. Tested with an MSI 4070 and Corsair SF750
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 313
- Wydruki
- 1
- Wyświetlenia
- 2578
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (3)Kolekcje (30)Powiązane
Prints without supports upside-down, is compatible with 3 slot GPUs and you can cut off some hight in the slicer, if you have more compact cables
Assembly
- Plug the GPU into the adapter
- Insert the middle (M2) rod and attach it with a washer and M3x16 screw from the bottom
- Screw in the thumb screw on the bracket
- Screw in 2 additional M3x16 screws with washers to the adapter for stability and secure them with a nut from the other side
- Screw in the PSU with the intake facing away from the GPU - the screws should be just long enough
After printing it, I saw 2 problems and have made some adjustments, but didn't reprint yet: The hole for the thumb screw was not properly aligned and it was a bit loose, so I have added a small extrusion on that side as well