1 / 3
ADT-Link UT3G USB4 eGPU+SFX stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple stand for an SFX PSU and eGPU with space to route cables. Tested with an MSI 4070 and Corsair SF750
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 315
- Makes
- 1
- Views
- 2,586
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
Prints without supports upside-down, is compatible with 3 slot GPUs and you can cut off some hight in the slicer, if you have more compact cables
Assembly
- Plug the GPU into the adapter
- Insert the middle (M2) rod and attach it with a washer and M3x16 screw from the bottom
- Screw in the thumb screw on the bracket
- Screw in 2 additional M3x16 screws with washers to the adapter for stability and secure them with a nut from the other side
- Screw in the PSU with the intake facing away from the GPU - the screws should be just long enough
After printing it, I saw 2 problems and have made some adjustments, but didn't reprint yet: The hole for the thumb screw was not properly aligned and it was a bit loose, so I have added a small extrusion on that side as well