KLP1 230 Filament Runout Sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A filament sensor for the KLP1 230. I also made a small strain relief plug for the wires.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had lots of trouble with the stock sensor so I made this from a combo of 2 existing good designs I have used in the past.
It has proven more reliable but not perfect as the filament will sometimes get caught just before the exit. I still like it more and have less issues.
I also made a small strain relief/plug part for the wires. I suggest you print out of TPU and use a sharp blade to cut the slot. Unless your printer is better at detail. The gap is like 0.2 so it is a bit past what my LK5 pro can do but I wanted it tight.