KLP1 230 Filament Runout Sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A filament sensor for the KLP1 230. I also made a small strain relief plug for the wires.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 172
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had lots of trouble with the stock sensor so I made this from a combo of 2 existing good designs I have used in the past.
It has proven more reliable but not perfect as the filament will sometimes get caught just before the exit. I still like it more and have less issues.
I also made a small strain relief/plug part for the wires. I suggest you print out of TPU and use a sharp blade to cut the slot. Unless your printer is better at detail. The gap is like 0.2 so it is a bit past what my LK5 pro can do but I wanted it tight.