Nozzle box for SV08 nozzles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small nozzle box that fits 4 nozzles and a small packet of thermal paste.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
A small box for SV08 nozzles, printed in 3DJake ecoPLA Sparkling Violet.
Printed on an Ender3-V2 with a Microswiss NG, dual Z-rods and BigTreeTech mainboard
Slicer settings (I used OrcaSlicer):
Default Ender3V2 and Creality Generic PLA profiles with following changes:
Strength:
- Top surface pattern: Octogram Spiral
- Bottom surface pattern: Octogram Spiral
Bed type:
Textured PEI Plate
Current fit is a little loose so it slides off easily, but it wont stay in place by itself.
For better holding I would scale to 99.96% in both X and Y.
Designed from scratch in Fusion360 and inspired by https://www.printables.com/model/956572-sv08-t300-nozzle-box-simple
I included the STEP file but the scaling is a bit wonky, I had to scale it down for a better fit (STL is pre-scaled).