License Plate Frame (US) - Print in Two Halves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
License Plate Frame printed in Two Halves. Sized for US plates.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
The license plate frame on my car was wimpy, so I replaced it with this frame which is not. The model is half a frame, allowing it to be printed on many printers. Print two of the model and glue together (you may want to bolt to a license plate when gluing to ensure the holes line up). I used PET-G which has warped a little after a year, but it is still solid (I believe I did 2 walls, 25% gyroid infill). Feel free to use something else if you like.
Edit - After several years I reprinted in ABS as the PET-G was pretty warped from the sun.