1 / 3
License Plate Frame (US) - Print in Two Halves
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
License Plate Frame printed in Two Halves. Sized for US plates.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 42
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
The license plate frame on my car was wimpy, so I replaced it with this frame which is not. The model is half a frame, allowing it to be printed on many printers. Print two of the model and glue together (you may want to bolt to a license plate when gluing to ensure the holes line up). I used PET-G which has warped a little after a year, but it is still solid (I believe I did 2 walls, 25% gyroid infill). Feel free to use something else if you like.
Edit - After several years I reprinted in ABS as the PET-G was pretty warped from the sun.