Super Slim Mic Stand - Shure Antenna Paddle Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A super compact mic stand intended to use with Shure UA874 and similar antenna paddles
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 713
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My wireless mic kits are (mostly) self contained, with one box containing receivers, cables, antenna paddles, etc. and another box containing transmitters and their accessories. The one thing that doesn't fit in either of these boxes is stands for the antenna paddles, and I've lost track of the number of times we've pulled up to a job site only to discover we forgot to pack stands.
There are many other low profile 3d printable mic stands out there, but I wasn't super confident that they would work for me, so I whipped up my own. Because it's so short, the stand is quite stable even with the large antenna paddles. It uses a 3/8" bolt and the 3/8" to 5/8" thread adapter that comes with Shure ULX-D handheld transmitters, though this can also be found for cheap online. I would recommend using some loctite on the bolt to ensure the stand stays together when mics/antennas are removed.
I didn't use any special print settings. I was trying to get them done fast, so I used the 0.28 extra draft profile in OrcaSlicer with less infill and no support.