TaoTronics-Ultrasonic-Cool-Mist-Humidifier Replacement Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Mist Duct For TaoTronics-Ultrasonic-Cool-Mist-Humidifier.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 68
- Wydruki
- 2
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Why
I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier. The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out at some point and went missing.
Improvements
This replacement is not a 1 to 1 but a improved design. The duct is shaped so it throws the mist much farther distributing it into the room better.
I have included the 3MF file as well as the fusion file so you should be able to modify it easily to fit any humidifier with a similar duct.
Instructions
If you want to print it in PETG on a MINI /MINI+ I have included gcode so you can print it right away.
Otherwise:
- Infill - Doesn't Matter
- Supports - No
- Brim / raft - Optional
- Layer height - 0.2
- Filament - Doesn't Matter
Conclusion
Hopefully this can help somebody like it did me. Happy Printing :) Leave a make and review if you print one and let me know if you need any assistance!