TaoTronics-Ultrasonic-Cool-Mist-Humidifier Replacement Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement Mist Duct For TaoTronics-Ultrasonic-Cool-Mist-Humidifier.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 68
- Makes
- 2
- Views
- 294
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Why
I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier. The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out at some point and went missing.
Improvements
This replacement is not a 1 to 1 but a improved design. The duct is shaped so it throws the mist much farther distributing it into the room better.
I have included the 3MF file as well as the fusion file so you should be able to modify it easily to fit any humidifier with a similar duct.
Instructions
If you want to print it in PETG on a MINI /MINI+ I have included gcode so you can print it right away.
Otherwise:
- Infill - Doesn't Matter
- Supports - No
- Brim / raft - Optional
- Layer height - 0.2
- Filament - Doesn't Matter
Conclusion
Hopefully this can help somebody like it did me. Happy Printing :) Leave a make and review if you print one and let me know if you need any assistance!