1 / 7
Jimny Rear Speaker adapter for 5.25'' Speakers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jimny Rear Speaker adapter for 5.25'' Speakers, if you have a 3D printer and a Jimny, better to put it to a good use,
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 558
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
Jimny Rear Speaker Adapter for 5.25''
2018+ Gen4 model Jimny
I used some Audiobahn As5.25i speakers, most 5.25'' speakers should work, but let me know if it does not.
I used some screws with polymer ends to secure the screws and prevent it slipping out from the vibrations.
Printed in PLA+
- 0.2mm Layer Height
- 3 walls
- 40% Infill - Grid or Hex
- 210 C Nozzle
- 60 C Print bed
Please show me your models and let me know how it goes with other kind of materials and settings.
Many thanks to @gwa_316020 for the original model, printed it but did not fit my speakers so remixed it to suit my needs,