Quadlock Desk Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy printable deskmount for mobile devices with Quadlock cases.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 273
- Wydruki
- 1
- Wyświetlenia
- 1025
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix is inspired by Quadlock Deskstand from AdventureAddicted. I made the design the way I liked it and made it into 3 parts so it it easier to print.
The FOOT comes in two editions (Normal and Extended) print the normal one for phones with total length up to 16,5cm, and the extended edition for phones longer than 16,5cm.
Look at the pictures so you orient the parts correctly for best result. I recommend using a brim on the neck so that it doesnt fall halfway.
In addition to the printed part, you will need:
1x M5 16-20mm DIN965
1x Plastic glue
4x addhesive rubber feet (get more adhesion the the surface it stands on)
I printed the model in PLA with gyrid infill 30%. No need for support, but make sure that you have good cooling. (For Bambu Lab printers: Leave the door open)