Aerogarden Harvest Storage Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage Base for Aerogarden Harvest (1 or 2 drawer)
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 692
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Storage base for Aerogarden Harvest models. There are separate files for each the 1 drawer or 2 drawer and optional flat-bottom drawer or gridfinity drawer, print whichever you would like. The 1 drawer base uses a bottom drawer only.
This storage base is also fully compatible with my Mini Tool Box and Mini Tool Box base linked in the description below (see photos). For best fit with a Mini Tool Box, you will need to choose the appropriate rail files, titled by what they fit with. The aerogarden rails are also compatible with the Mini Tool Box Base if you would like to have 3 drawers under your Aerogarden.
Mini Tool Box: https://www.printables.com/model/1166804-mini-tool-box
Mini Tool Box Base: https://www.printables.com/model/1166916-mini-tool-box-base
Settings: 0.2mm layer, 3 walls, 15% infill. The 2 drawer can be a bit tricky to fit on a 256x256 print bed. For best results use manual supports painted on the corners with supports set to normal and snug.
Be sure to check out my profile for more of my designs.
Commercial licenses for selling physical prints of my designs are available via my MakerWorld page.