Liczymy pasujące modele…
I always had problems with my Kratky bottles. Either, they were super hard to refill, or the plant just dropped into the vessel. This adapter fixes that! You can just easily fill the nutrient solution into the funnel, and it will flow…
Note, most of the parts are compatible with the original tower system, so you can use those too. Some parts of the original system with a low bottom might not fit with the new parts that have an internal pipe, if the top part has low…
Simple brackets to mount the T8 lights onto a Hydroponic Tower this is made for 8mm rods as the “arm” one bracket is for easy mounting using zip-ties.
Modular Hydroponic Tower made for 2inch Net Pod this is the best model as of now and its a world of difference with the other one. the fact that you dont need to spend hundreds of hours more to print the net pods, simply use cheap…
I originally made a modified 6 pod section which has integrated mounting tabs but figured a mounting section which attaches to the regular 3 or 6 pod section would be more useful. Uses 4x M5 bolts and nuts to mount.
I recommend PETG for this print. Use the top cover to prevent light from getting inside. GymBeam and Optimum Nutrition containers are confirmed to fit. https://en.wikipedia.org/wiki/Kratky_method
The Gamma2 buckets come with a screwable lid (vs lids that “snap” on) and a cross section directly through the center. This is an adapter which connects to the Modular Hydroponic Tower…
Update 31.05.2025: There is now a sealing ring that is placed between the individual elements. This ring additionally stabilizes the tower. The sealing ring have to be printed in TPU! My tower is getting on in years and the individual…
Hydroponic system for 1" rockwool cubes using nutrient film technique in 2x3" vinyl downspout.
This is a print-in-place model with no supports. You'll need to print these 2 parts four times. Then flip two of the parts to create the circle. The circumference of the tower was approximately 14.25 inches, resulting in a diameter of…
The lid is 36.9mm by 56.9mm for a tower I bought off of amazon. It has a lip and should fit snugly. This was my first attempt at 3d modeling for 3dprinting so it's far from perfect!
Hey, we designed this hydroponic tower after we tried some other models here. Unfortunately, we were not happy with other models for our usecase. We want to grow up fruits ad vegetables. We needed more stability and bigger pots, so I…
Description Experimental vertical hydroponics system I have designed for growing Herbs indoors. Things you will need for the assembly: M5x40 button head cap screws (x18) M5 nuts (x18) M8 threaded bar (730mm minimum) M8 nuts (x8) M8…
The sign goes around the Jiffy pad where I grow the seedlings in. Once the seedling is big enough I put the substrate pad on the pin and put it into the tower pot. You might not want to put it in too deep which helps the small seedling…
Estensione della vite, lo utilizzo per rendere più resistente l'idroponica usando il vaso sortera per infilarlo dentro il sostegno https://www.printables.com/model/1478576-stutzrohr-hydrotower-sortera-60l Il sostegno di cui sopra dovrà…
una versione ribassata di 2 cm per adattare la vite del coperchio che ho remixato
🌱 Semi-Hydroponic Planter A simple semi-hydroponic planter with a two-part design: outer ribbed pot (water reservoir) inner cup with drainage holes for the plant and substrate Designed for use with LECA and other semi-hydroponic setups. 🖨…
The remixed files here are what I used in my setup -- based on Modular Hydroponics Tower w/ Grow Lights , together with the Lowes 5-gallon bucket lid . I also have a remix of the led arms which I will upload later.
This lid is design so you can use an Ikea Fniss as a water deposit for your hydroponic tower
Hydroponics Garden v1.1 is a compact and modular hydroponic growing system designed for indoor use. It is ideal for growing herbs, lettuce, and other leafy greens using minimal water and no soil. The design is optimized for 3D printing…
Modular Concrete Hydroponic Tower - Spiral Mold System (BETA) ❤ Support the Creator / A Special Request If you love this design and want to see more ambitious and complex projects like this come to life, please consider purchasing the…
Edit: I found that one of my prints developed a leak between the printed layers. I am not sure if using a .6 would fix that or not, or changing wall thickness. I added a lid that fits an ice cream bucket from an ice cream shop. It works…
Bracket that holds 4x3 vinyl downspout. Remixed version for larger downspout.
這是一款為水耕系統設計的 極簡風定植籃 ，以乾淨俐落的結構，提供根系最大的生長空間。 整體採用高透通設計，側邊大面積開孔，有助於： 根系自然伸展、不纏繞 提升水流循環與含氧量 降低積水與悶根風險 適用於 3.3cm～3.8cm 直徑開口 ，常見於 DIY 水耕箱、育苗盤、3D列印水耕盆栽等系統。 簡約外型不搶植物視覺，特別適合生菜、香草、草莓等小型作物。 This minimalist hydroponic net cup is designed to provide a…
A quick remix of dousto's excellent remix of Luitzor's original tower. Rotates segments at half the golden angle to create a pleasing phyllotaxis-inspired spiral which maximizes light distribution. I've included the step and stl for the…
Grow herbs like basil and oregano in your kitchen all year round. This indoor planter uses a passive hydroponic system, so it doesn't need a water pump and is completely silent. The setup is modular, and you can easily adjust the height…
Printed on protopasta petg and then sealed with Diamant. You can put in small PP colored fishing hook balls that float in order to see when the water has ran out at the bottom.
This 3D printed hydroponic netpot (Ø8 cm) is specifically designed for 4×4×4 cm rockwool cubes . Unlike standard netpots, this design eliminates the need for clay pebbles or other growing media. The structure securely holds the rockwool…
Ein Terrassenmodul um deinen Hydroponic Turm zu erweitern. Jetzt auch für das 3 Pot Segment. Du brauchst lediglich M5x16 Senkkopfschrauben um die Terrasse am Turm zu befestigen. Einfach zu drucken. Es wird Support an der Aufnahme…
Deeper full-width cups for the popular Modular Hydroponic Tower Garden
2 gallon lid for Modular Hydroponics tower.
My hydroponics towers are on a rotating base plate . Rotate In order to keep the dispenser working AND keep the tower free to rotate the feed hose has to be free of the dispenser. So I removed the hosebarb and center and stuck the hose…
This is a project for a college course where the goal is to create a hydroponic tower that aims to reduce the sound profile and improve the aesthetics of other similar models. Parts:…
I created this spacer to mount the four-armed rings and terraces.
Just a small three part print for a water level for a printed hydroponics tower: rod, floater and fitting. For some reason the rod came out slightly oval, but I still could screw it into the floater part. I used three M3 bolts and nuts to…
Hydroponic garden system (like IKEA vaxer). 3 of these 6-cell modules fit in the basic Ikea Greenhouse (model: SOCKER) Print the vase in "vase mode" with one layer. If you printer cannot do that, try the "thicker-vase.stl" file. I used a…
I'm currently using this light: https://www.amazon.com/dp/B0BCVHMJ46?psc=1&ref=ppx_yo2ov_dt_b_product_details You may or may not need supports depending on your printer settings
Accessories for the TowerGarden – towergarden(dot)com Instead of the two upper floors of herbs, you now have 8 more normal places at half height. Requires 12xM4 12mm screws and matching nuts Only chemically inert and food-safe materials…
Hydroponic Planting System is a remix is not only my designee, and I think maybe some of you will like and need one I have adapted to my designee the pot support and the lock mechanism. The module has 3x planting spot's with a 3mm wall…
This is a hydroponic trough drain for rectangular trough NTF systems http://en.wikipedia.org/wiki/Nutrient_film_technique . It's also useful for draining tubs and barrels and uses a standard (even in this metric world) 3/4" BSP threaded…
This is a small pot for raising plants with hydroponic. The second Inlay(water) is for use with the smallest “Leni Hydrokultur”-Waterlevel gauge. (For this Inlay you need support) Prevent waterlogging with the raisers (3 or 12 mm) use 5…
I took the stream breaker and added a cylinder to the top so it can be held down by the lid. I also added some fillets around the legs for strength. I'm not actually sure how people have been attaching the original stream breaker, but…
Original models: https://www.printables.com/cs/model/669456-modular-hydroponic-tower-garden
3D Hydroponic Tower with 4 Openings Overview The 3D hydroponic tower is a versatile and space-efficient solution for growing plants in a controlled environment. Designed with four openings, it allows for easy access to the plants while…
This is a simple water level indicator for the hydroponic tower. I adapted a lid for this and fitted it with a hole and a guide for the swim body. The swim body have to be printed with three outer walls and hollow.
Everything from the original creator, remixer and added a Spacer Adapter to put at the bottom to raise the height due to the conditions of my balcony. Printed in various ESUN PETG, 35 % infill, gyroid. I would suggest a bigger nozzle 0.6…
It is easy and support free to print. Set the infill to 20% minimum.
I always had problems with my Kratky bottles. Either, they were super hard to refill, or the plant just dropped into the vessel. This adapter fixes that! You can just easily fill the nutrient solution into the funnel, and it will flow…
The bottom “cross” snaps into the net cup and allows it to get fixated. Without the stabilization, it fell over a lot in my DWC. The hole for the net cup is 50 mm diameter in size by default. You can also plug a few 5 mm wooden sticks…
This is a blackout sleeve and cover for 32oz mason jars, for use with Kratky hydroponics. The sleeve blocks light to prevent algea growth. The sleeve fits loosely so the plant can be lifted out to check nutrient levels easily. The cover…
Reddit post with video: https://www.reddit.com/r/Hydroponics/comments/1fe9l4d/3d_printed_ladderpot_for_morning_glory_and_other/ Print settings I've used A1 Mini with: 0.6mm nozzle (so it's faster) 0.24 - 0.3mm layer height 5-7 walls - as…
Using the container for a Kratky setup. I wanted to put more nutrient solution in the container but the holes prevented that so these are plugs for the holes. Specifically for these Sterilite Stacker Totes, I use the 4 gallon version but…
This “Hydroponics” planter with water feature is designed to allow users to print multiple sections to make a planter with a water feature as tall as you'd like. The only thing you'll need outside the printed parts is some filter…
This is an adapter for the modular hydroponics tower: Modular Hydroponic Tower Garden by chrisebryan that can fit a standard 5 US Gallon bucket. You need: 5G-lid (x4) *5G-lid-lock (x1) *5G-lid-notch (x1) 5G-lid-window (x1) 5G-lid-cap (x1)…
I remixed the original because the holes in the filter-spacer were missing and the box for the water and pump was too small and without a manitance opening for pooring water and measuring the PH- and EC-levels. Printed with PETG for water…
Support system for plants from the stem of the lamp. Stem of lamp was arround 15.4mm so can fit many diffrent models Used infill 15%
the idea is to use empty protein containers for small hydroponics towers. Need to test the idea. Probably containers will need some support that they will not fall in wind or put inside some rocks or other heavy material. Please measure…
Female and male couplings of the remixed hydroponics tower. Handy to create custom components.
Updated 19.10.2024. This version has the holes for the screws and is ready for the 12 M3 screws and nuts. ----------------------------------------------------------------------------------------------------- Printed on ELEGOO Neptune 3…
This requires less material (but is still strong). The added notches at the top so that one can add a distributor disc to better focus how the water hits the plants below. (Uploaded model was a test article, I haven't yet fully explored…
A somewhat parametric hydroponic glass lid inspired by leemes parametric net pot (OpenSCAD) design. You can find leemes model https://www.thingiverse.com/thing:790339 I declare this model as only “somewhat parametric” because I couldn't…
A pot for a hydroponic system to hold a rockwool cube. Designed towards the grodan SBS36 that I use. It fits snugg and tight so that the Plant doesnt fall sideways gaining laverage over the pot potentially destroying the pot. The bottom…
After printing the hydroponics tower and adapting it to live on a 2 gallon bucket, I needed a way to pass the power cord for the pump that lives in the bucket through the lid without a gaping light leak that would encourage algae. 25x20…
A simple rack that holds hydroponic tower grow cups upright while establishing roots in a seed starting. Blacks out the water area underneath of the tray to discourage algae growth. Once the seedlings are established and there are roots…
This is a hybrid design that can be used both with and without water in the bottom container if water is placed there the plant roots will travel down to the water making manual watering less frequent but this model can also be used as a…
printed out of petg 25% infill with 3 perimeters .15 structural I designed a solution to hold those specific amazon led lights for the hydroponics tower maybe it could work for other lights as well
i found the file for the dispensor with holes. Happy growing!
My original Kratky model used canning lids that are made of metal. After a few uses they tend to rust. Luckily I found a regular mouth jar lid here on printables and modified it to add the rockwool cube holder.
Note, most of the parts are compatible with the original tower system, so you can use those too. Some parts of the original system with a low bottom might not fit with the new parts that have an internal pipe, if the top part has low…
a simple sprinkler elbow thingy to completely change the flow of water of your hydroponic system. the original way the pump work is just making the water circulate underwater from the side… very inneficent and wasteful. this adapter fits…
Remix to add a Hole and lid to refill your bucket.
Green Onion Mason Jar Station! tired of buying and buying? time to start growing instead! simply chop the bases off the onions and stick them inside a jar of water (with nutrients). they dont need much light and are very hardy. made for…
Simple hydroponic pot for 4 basket. Remember to print it with PETG/ASA/ABS PLA is not well to use with water
[Glare Screen] useful for Welding, Fish Tanks, Aerogarden, Hydroponics, Photography Flash… you can create a simple lightweight universal glare screen blocking 99% of light from a particular strong source. for example me: i have two…
The 3D-printed clip for a hydroponic system is designed to securely lock in rockwool cubes, providing an optimal environment for plant growth. It was made for Dani's Hydroponic 50mm tower…
My hydroponic tower has a vent that water drops can come out through. This is a model for a vent cap that still allows good breathing, while returning splashed water drops back to the water reservoir. Simple print, recommend black. No…
The original had a m20 thread that did not fix the light linked for me and a few others in the comments. I measured the base and made a threaded hole that hold the light
Hope this helps. It's possible to print without support, if the round opening is on the bottom.
These net cups are designed to sit flush in a 4-inch PVC hydroponic system and fit perfectly with one cube of rock wool. I've included a long and a short version. I also included a cover that can be placed over the net cup when not in use…
Simple brackets to mount the T8 lights onto a Hydroponic Tower this is made for 8mm rods as the “arm” one bracket is for easy mounting using zip-ties.
Modular Hydroponic Tower made for 2inch Net Pod this is the best model as of now and its a world of difference with the other one. the fact that you dont need to spend hundreds of hours more to print the net pods, simply use cheap…
A height adjustable hydroponics plant pot made with 3d printing in mind. I made this design mainly because net cups made for hydroponics where I live are fairly expensive and they don't allow me to use whatever media I want due to the…
This is meant to easily attach a ¾ inch PVC pipe as a feeder line for Hydroponic Dutch Bucket System that use a 5 gallon bucket with a lid. How to use: Drill a 7/8 inch hole in the top of the bucket lid. Place Clamp Support in hole Drill…
This is a bottom base to a hydroponic garden model I previously used.
HydroForge is a compact, 3D-printed, automated hydroponic system that provides a fresh, year-round supply of herbs and small plants with minimal effort. Whether you're a seasoned chef or a cocktail enthusiast, HydroForge makes it easy to…
Tend to your Gardyn hydroponics plants without spilling water all over the place. This ySleeve will hold your yPod while it is out of the system for harvesting or plant maintenance. It has cutouts on the sides to make it easy to remove…
This plate can be used to grow cuttings as hydroponics. Simply place them on a jar or something similar. That way the leafs don't touch the water and can't rot easily. The top has a conical shape so water is able to drain into the jar. It…
i printed this in PETG O.2 layer 20 % infill print upside-down with tree support touching buildplate only
These vases are an excellent choice for individuals who value unique and contemporary home furnishings and wish to enhance and diversify their home's style. With their practical and aesthetic design, they will look great even in…
There is 3 files: A big rockwool support you can fill with clay balls to avoid the rockwool to became greenish A cover for this rockwool support when he is empty A cover for the hole directly. This is made for the 10*10cm rockwool
I really liked @Jack_43540 's hydro pot, but needed something significantly bigger for my tomato plant. So I've created my own pot in Fusion and reused Jack's lid and sleeve (net pot) scaled up by 150%. You could also take my pot and…
Поддон гидропоника с автополивом с возможностью горячей замены бутылки без выкручивания и переворачивания горшка Возможность регулировки уровня. Внимание подходят не все бутылки большие а только плотные (из под минералки) - их НЕ должно…
