5 Gallon Printed Lid for Upgraded Modular Hydroponics Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a printable 5 Gallon Lowes Bucket Lid for the Upgraded Modular Hydroponics Tower
- Ocena
- 0 / 5
- Polubienia
- 53
- Pobrania
- 402
- Wydruki
- 0
- Wyświetlenia
- 2490
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Remix Requires the use of Bucket_Lid_Mount-2.stl from https://www.printables.com/model/232109-upgraded-modular-hydroponics-tower-addons
This has been specifically been designed around a blue Lowes 5-Gallon Bucket, others may work but have not been tested.
The connecting Holes are 4.75mm, around the diameter of the pieces, the holes connecting the mounting plate are 5mm.
US Hardware #10-32 works in this as well.
You will need a minimum of 18 fasteners, you will need nuts(6) for the 5mm holes, but the 4.75mm holes act as self tapped and nuts aren't specifically required.
Print 4 without holes, and 2 with holes if you would like 2 access holes. 1 for filling and the other for the cord.
The pump cord and water fill caps are experimental and if you would like to design your own, the large access holes for watering and cords are 42mm.
Edit: 3/1/24. Caps have been tested and are working well, updated pic of lid in use added to gallery. Its working great.