Modular Hydroponics Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular Hydroponics Tower for you to grow a huge amount of plants in a small area. Designed to fit on a small printer.
- Ocena
- 5 / 5
- Polubienia
- 486
- Pobrania
- 1555
- Wydruki
- 2
- Wyświetlenia
- 12 709
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This modular hydroponics tower lets you grow a large amount of plants without the need of lots of room. Each module fits 3 50mm (2 inch) pots and has the water tube running up the middle. Just stack as many modules as you require.
Each module is designed to fit 3 M3x4x5 heat-inserts and bolt together using M3 x 6mm bolts.
I designed this to fit on a small 3D printer, with a build area required of 170 x 170.
At the bottom of the stack you need the Base with a 16mm barb fitting and the optional base clamp (to clamp to the other side of a container lid) and attach it to a submersible pump.
At the top you push in the shower head and bolt on the lid. I drilled out the holes of the top module to 4.5mm to fit in 3 heat-inserts to make this secure but it does function fine without the lid bolted down.
Have fun growing!