No-glue Stream Breaker for Modular Hydroponic Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stream breaker that doesn't need to be glued in place
- Ocena
- 5 / 5
- Polubienia
- 82
- Pobrania
- 746
- Wydruki
- 8
- Wyświetlenia
- 3317
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I took the stream breaker and added a cylinder to the top so it can be held down by the lid. I also added some fillets around the legs for strength.
I'm not actually sure how people have been attaching the original stream breaker, but from photos I have to assume it was glued in place. I didn't want to do that, just in case I needed access to the water outlet for some random reason.
Instructions
Print with the cylinder top touching the build plate. Low infill (5-20%) should be fine. No supports needed.
If you use the .3mf and your slicer gives you a warning about multiple objects at different heights, make sure you load it as a single object (click “Yes”). Or, just use the .stl file instead.
Updates
May 16, 2024 - Added .stl file