No-glue Stream Breaker for Modular Hydroponic Tower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stream breaker that doesn't need to be glued in place
- Rating
- 5 / 5
- Likes
- 82
- Downloads
- 746
- Makes
- 8
- Views
- 3,319
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I took the stream breaker and added a cylinder to the top so it can be held down by the lid. I also added some fillets around the legs for strength.
I'm not actually sure how people have been attaching the original stream breaker, but from photos I have to assume it was glued in place. I didn't want to do that, just in case I needed access to the water outlet for some random reason.
Instructions
Print with the cylinder top touching the build plate. Low infill (5-20%) should be fine. No supports needed.
If you use the .3mf and your slicer gives you a warning about multiple objects at different heights, make sure you load it as a single object (click “Yes”). Or, just use the .stl file instead.
Updates
May 16, 2024 - Added .stl file