Cupid's Arrow Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cute Cupid's Arrow Magnet 🏹❤
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 140
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
❤🏹 Cupid's Arrow Magnet 🏹❤
Do you still need a super cute gift for someone special in your life, or do you love leaving little notes for your partner? Then this adorable magnet is just perfect for you!
When you use it, it looks like the heart arrow is stuck right into the surface!
The model is designed so that the print pauses at a certain point. During this pause, you have time to place the magnet into the hollowed-out hole in the model. Then, simply resume your print, and the magnet will be enclosed within your print—so easy!
The hole is made for magnets with a diameter of 6mm x 6mm and a height of 3mm.
The model itself is about 37mm high but you can size it to your liking!
No supports needed!
If you want to use a different magnet size, you can easily adjust the dimensions of the “generic-cylinder”.
Just make sure to adjust the placing, set a new print pause (rightclick) and delete the old one!
The pause needs to be placed on the layer that comes right after the hollowed-out hole.
If you don’t have the option to pause your print, modify the model without a magnet hole or with the fully cut-out magnet hole!
The model is available in different versions:
- 1 arrow in multicolor
- 1 arrow in single color
- 12 arrows in multicolor
- 12 arrows in single color
- Arrow without cutout
- Arrow with bottom cutout
I recommend using the multicolor option with 12 arrows, as this reduces filament waste and makes the printing time much more efficient.
Have fun printing! ✨