1 / 6
Quiet MK4S Fan Cover - For Loud X-Axis Reverberation- Parametric Model — zdjęcie 1
1 / 6

Quiet MK4S Fan Cover - For Loud X-Axis Reverberation- Parametric Model

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Part cooling fan cover that stops the loud X-Axis movements caused by the vibration of the fan and the resonance of PC.

Ocena
4,9 / 5
Polubienia
85
Pobrania
208
Wydruki
10
Wyświetlenia
1918
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Hello!  Prusa MK4S's make a loud weird sound when they move along the X-Axis:

I designed a new cover that stops the reverberation by applying 0.6mm center press on the fan motor.  I'm uploading a parametric F360 file, if you want more or less offset, change the DampnerThickness parameter.

The MK4S part cooling fan, as-built, vibrates with the resonance of Polycarbonate when the machine moves along the X-Axis.  Polycarbonate is more resonate than PETG or PLA.   Think about the loud rattle you get when you drop a CD/DVD, or a Drivers License (both are polycarbonate). You can actually stop the sound just by removing the cover, but then the wires are exposed and ugly.

I printed in Prusament PCCF (using the last of my sample roll <crying emoji>), but my previous iterations for testing were all in different types of PETG.  PETG-CF looks very similar to PCCF and should perform fine.

I printed with default settings in Prusa Slicer for Prusament PCCF, using a 0.40mm ObXidian HF nozzle, 0.20 Structural Speed Setting, with first layer set to 30 mm/s. I set supports to build plate only (for the screw holes), and popped them out with a screwdriver.  I dont think they are really necessary, bc I didn't use them on my previous iterations, but I only had about 1m of PCCF and didn't want to mess it up.