Quiet MK4S Fan Cover - For Loud X-Axis Reverberation- Parametric Model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Part cooling fan cover that stops the loud X-Axis movements caused by the vibration of the fan and the resonance of PC.
- Rating
- 4.9 / 5
- Likes
- 85
- Downloads
- 208
- Makes
- 10
- Views
- 1,918
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
Hello! Prusa MK4S's make a loud weird sound when they move along the X-Axis:
I designed a new cover that stops the reverberation by applying 0.6mm center press on the fan motor. I'm uploading a parametric F360 file, if you want more or less offset, change the DampnerThickness parameter.
The MK4S part cooling fan, as-built, vibrates with the resonance of Polycarbonate when the machine moves along the X-Axis. Polycarbonate is more resonate than PETG or PLA. Think about the loud rattle you get when you drop a CD/DVD, or a Drivers License (both are polycarbonate). You can actually stop the sound just by removing the cover, but then the wires are exposed and ugly.
I printed in Prusament PCCF (using the last of my sample roll <crying emoji>), but my previous iterations for testing were all in different types of PETG. PETG-CF looks very similar to PCCF and should perform fine.
I printed with default settings in Prusa Slicer for Prusament PCCF, using a 0.40mm ObXidian HF nozzle, 0.20 Structural Speed Setting, with first layer set to 30 mm/s. I set supports to build plate only (for the screw holes), and popped them out with a screwdriver. I dont think they are really necessary, bc I didn't use them on my previous iterations, but I only had about 1m of PCCF and didn't want to mess it up.