1 / 1
Ikea Lack Enclosure: leg extensions
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4cm high leg extension for pavers, or to repurpose enclosure for new printer. Requires superglue to bottom of legs
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
These extensions are great if you do not want to reprint taller legs, and are okay with using superglue. I created this to accommodate fitting in a concrete + rubber paver, and be able to use a shorter screwdriver to attach to the bottom of table's legs
How to install:
- Unscrew existing 3d printed legs from the table's legs
- Screw in the 4cm extensions to the bottom of the table's legs
- Use 70-99% alcohol (use a different cleaning solution if you are not using PLA!) to clean the bottom of the 4cm extensions, and the top of 3d printed legs
- Superglue the 3d printed legs to the 4cm extensions
Note:
- This procedure is pretty much irreversible, use at your own risk
- This is not perfect solution, and this would not solve your problems if you already have perfectly cut acrylic panels.
- I used cheap superglue from dollar store to glue the extensions to the legs, and the hold is very sturdy!