1 / 1
Ikea Lack Enclosure: leg extensions
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4cm high leg extension for pavers, or to repurpose enclosure for new printer. Requires superglue to bottom of legs
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
These extensions are great if you do not want to reprint taller legs, and are okay with using superglue. I created this to accommodate fitting in a concrete + rubber paver, and be able to use a shorter screwdriver to attach to the bottom of table's legs
How to install:
- Unscrew existing 3d printed legs from the table's legs
- Screw in the 4cm extensions to the bottom of the table's legs
- Use 70-99% alcohol (use a different cleaning solution if you are not using PLA!) to clean the bottom of the 4cm extensions, and the top of 3d printed legs
- Superglue the 3d printed legs to the 4cm extensions
Note:
- This procedure is pretty much irreversible, use at your own risk
- This is not perfect solution, and this would not solve your problems if you already have perfectly cut acrylic panels.
- I used cheap superglue from dollar store to glue the extensions to the legs, and the hold is very sturdy!