1 / 7
GL.iNet Beryl AX 6-inch or 10-inch Rack Mount — zdjęcie 1
1 / 7

GL.iNet Beryl AX 6-inch or 10-inch Rack Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 6-inch or 10-inch rack mount for the GL.iNet Beryl AX WiFi 6 travel router

Ocena
4 / 5
Polubienia
51
Pobrania
352
Wydruki
3
Wyświetlenia
1676
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A 6-inch (and now also 10-inch) rack mount for the GL.iNet ( GL-MT3000 )Beryl AX WiFi 6 travel router.  Includes plenty of ventilation.  

Inspired by and compatible with @Mauker 's series of 6-inch tiny rack accessories and models.  See his collection here.

 

The built-in antennas are sliiightly too wide to accommodate the rack posts and so sit either vertical or at a slight angle.  The 1U above this will need to have enough clearance for them to intrude.

Includes plenty of ventilation, a snug fit, and access to the side reset and accessory switches.

 

UPDATE: Added file with option to use one or two M5 x 6-8mm screws to fasten the router more securely to the mount.  Remove the corresponding rubber pads on the bottom of the router.  M5 threads snugly into the plastic of the existing screw holes underneath.

UPDATE 2: Added a 10-inch rack version

 

Print as oriented in the file with the face plate down.  No supports needed.

Tagi