FFP mask holder for ski helmet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A FFP2 mask holder for the ski helmet.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A FFP2 mask holder for the ski helmet.
The mask holder consists of 3 parts (see cross-section image). Two parts (A and B) are mounted on both sides on the chin strap of the helmet. A 12 x 3mm magnet is inserted before mounting with 2mm screws.
The third part (also 2 pieces) is attached to the straps of the FFP 2 mask. A 12 x 1mm magnet is integrated into this part during printing. To do this, insert a corresponding pause.
Note: I had problems with the pause when I started the print via Octoprint. In that case the nozzle temperature remained at 0 after resuming. If in doubt, slice it yourself.