FFP mask holder for ski helmet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A FFP2 mask holder for the ski helmet.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 330
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A FFP2 mask holder for the ski helmet.
The mask holder consists of 3 parts (see cross-section image). Two parts (A and B) are mounted on both sides on the chin strap of the helmet. A 12 x 3mm magnet is inserted before mounting with 2mm screws.
The third part (also 2 pieces) is attached to the straps of the FFP 2 mask. A 12 x 1mm magnet is integrated into this part during printing. To do this, insert a corresponding pause.
Note: I had problems with the pause when I started the print via Octoprint. In that case the nozzle temperature remained at 0 after resuming. If in doubt, slice it yourself.