Counting matching models…
I wanted to make a Mimic version of the CORE One long time ago (almost as soon as the printer was released) but the project was quickly replaced by others and was almost forgotten. The "Skin" contest was a good opportunity to start over…
Simple napkin holder. Scale to your liking. Requires some supports in the largest holes; otherwise it should bridge just fine.
Dewalt 18V Battery to Dewalt 12V (NiMH) Skin ** you will be over volting your tool ** Extra requirements 2 x 6mm male spade connectors 2 x 6mm long male spade connectors 4 x M3 nuts 4 x M3 10mm socket head bolts 2 x wires 40mm long, 5mm…
This is an education model that represents the typical perovskite crystal structure of materials such as metal halide perovskites (e.g. CsPbBr3), used as a next generation material for photovoltaics (solar cells or LED lighting). I…
🛠 Customizable in Your Browser Adjust size, height, clearance, and more so it prints exactly how you need. Customize it on the Lunar Prototypes website. No slicer hacks or CAD required. Build Your Version Now See below for more details…
I have remixed the ender 5pro skirts to fit 50mm fans for a cooling solution for the electronics enclosure. Use heat inserts in the centre part of the skirt for the fan.
Tvman Head for dummy 13 v1.0 (Beta) The size corresponds to a dummy 13 scaled to 120%
Rollerski and poles carry holder. Securely holds everything in place while you travel to the ride via any menas of transport or by walking. Easily adaptable to particular rollerskis thanks to OpenSCAD source. Simply adjust parameters in…
Bei meinem Skianzug ist dieses Teil gebrochen und ich habe es nachgebaut.
Moved the display to the front when Clicky-Clack Door is installed. Otherwise parts of the display are invisible below the new 2020 profiles of the door. Add an extra 1mm to ensure the door can move freely.
This 3D-printed top floater is a replacement for the Eheim Skim 350’s original floating intake, designed to enhance water surface skimming while preventing fish from being drawn into the intake. The slimmer slits allow effective water…
The original skid of my old Nano CPX was broken. This one weights just a tiny bit more (0.75 g vs 0.65 g), but if you drop the rectangular reinforcement frame, then the weight is the same. Feel sturdier than the original Printing: PLA is…
Designed from scratch, but very aesthetically compatible with the existing Voron Zero skirts. Fits in the 100mm gap that you add if you swap all the y extrusions from 200mm to 300mm. Why did you do that? Who cares!
This design is a prototype tool concept intended to facilitate the transferring of PA12 bulk powder to supply station cartridges to support part printing on an HP MJF 580 3D Printer. This build was an initial build for concept prototyping…
A remix to suit my needs. I wanted these parts to match the shape of the original Voron release parts I had printed.
This model features a wireframe Rhombic Dodecahedron, designed in CAD and refined through an iterative process to form a Level 3 Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring…
I used the Voron V0.2 Master Assembly Fusion 360 model and added a 22.15mm hole to the rear skirt so that I could add a switch for my LEDs.
Many cheap 3D printers utilize cheap, noisy stepper drivers which can produce a rippling effect that propagates in the x and y directions. This is known as "salmon skin" and was present on the Ender-3 Pro. To mitigate this issue to a…
its a part to fix skiis WARNING AFTER ONE YEAR OF USE ON JUMPS BIG JUMPS THEY FELL APART RELEASING FRONT TENSION THAT COULD LEAD TO INJURY OR DEATH I AM NOT RESPONSIBLE FOR YOU. PRINT THIS IN ABS OR ASA OR BETTER
This model features a wireframe rhombic dodecahedron, designed in CAD and refined through an iterative process to form a Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring any…
Used under Paizo's Community Use Policy ( paizo.com/communityuse ), and using a model by Dragonfly, this little guy is ready to rumble with whatever the Pact Worlds want to throw at them. I've tried FDM printing a few times, but the…
Simple elegant decoration for your home. If you enjoy my content by me a coffee. Thank you for support beforehand :) https://buymeacoffee.com/MRinlandcost Commercial License If you would like to print and sell my work in link below you…
I wanted to build a folgers can for my pinball machine so decided to give it a shot and here are the results. I originally set off to install on the lower left side below the ball return to try and limit the ball bouncing over that ramp…
I modified this bowling pin as I needed some type of mod to help block the ball from going off the left side ramp (lebowski) and getting stuck. Made some size adjustments and added a base for easier mounting. I'll also include my versions…
Needed a way to mount the 60mm electronics cooling fan on the switchwire or add a second one Middle skirt modeled to eliminate mounting points for the Mini12864 Bodies on holes can be used to add infill pattern or multicolor to the skirts…
Mod to turn the side skirts into small handles. To make them a bit stronger I added one more screw fixation. I have two versions, with the original hex pattern and a solid version. I use the solid version on the fanside to prevent the…
Mega Barrel for the Pick-Rocket 2 X-Shot Skins Menace Remix After seeing the model and remembering that the menace could launch Megadarts (tnx @Corvus_1914958), I knew there was more potential being left on the table. Someone just had to…
It features a display port for one 126x64 OLED display (ssd1306). Additionally up to four toggle switches can be mounted. You are going to find all .step files for download too, for you to modify Printing: Print all parts in the…
This Skirt takes 30mm fans in order to keep your Vorons electronics compartment cool. The parts fit like the original ones. The 30mm fan does not need to be the same as in the hotend. a cheap one will do. Looking for a 30mm fangrid?
This is a remix of the original BoxTurtle part. It allows you to use a CLINKO M12 connector for the cable that runs between the BoxTurtle and the printer's main board. It's up to the builder to work out the details, but my planned…
Voron V0.2r1 Stealth Skirts for Mini Fridge / Colony Clacker door and Mellow Fly TFT V2 touch screen…. wow that was a mouthful.!!! so this one was born when a good friend reached out to me and asked if it were possible to somehow fashion…
Not sure how I wanted the skirts for my 🥰 BoxTurtle , whether to go the true mesh way or rather opt for a mesh-like look only but have them printed solid 🤔, I played around in CAD to have the mesh as a separate part and also to do some…
[GERMAN] Hallo zusammen, nach der Suche nach einem guten Schleiftool für Snowboards ist letztlich ein eigenes Tool entstanden, um den Anforderungen von Ski und Snowboards gerecht zu werden. Dies sind beim Snowboard vor allem die…
The 🥰 BoxTurtle Enclosure comes with a redesigned front and different skirt parts which require some changes to the TurtleFence . So here they are: Modified front skirts, spacers and the clip-in mesh inserts to fit the enclosure … and of…
Voron V0.2 Fridge Door / Colony Clacker Stealth Skirts 2.8" Waveshare screen as the tittle suggests, you are now out of breath reading it… lol but this is the Stealth Skirts option if you want to fit the Waveshare 2.8 inch screen to your…
5x M8 screws, 5x M8 nuts and 4 washers. Print with PETG. *skimmer3.stl should be printed really strong (5-6 walls + increased bottom and top layers + 20%+ infill).
This was a shape I thought would work well to show more of the volume a printer is capable of, using less time and filament than a typical sculpture. Prints well in transparent PETG at a default 50mm base size, using less than 10g of…
I bought skimmer from Aliexpress for above ground pools and it should be mounted on pool with hard sides. I have above ground pool with only linen and there was leak at the bottom of skimmer between rubber sealing and linen. This gasket…
see as well: https://www.thingiverse.com/thing:7099082 Print Settings Rafts: No Supports: No Resolution: 0.14 - 0.28 Infill: 45% Filament material: ABS (ASA should work as well, PLA might get too warm, it's quite near the heatblock…)…
This egg has a snakeskin like texture on the surface, sort of a warped weave pattern. The maze is medium difficulty with mostly shorter dead-ends. If you want to close it so the pattern lines up, you may have to solve it several times to…
I love the old PC game, Crimson Skies. It's fun finding an already great model and adding some additional detail for larger prints with 2 different canopy options. Optional nose cone without guns. I am not a designer, just a hobbiest that…
Template to cut out a skin for the Leatherman ARC. I cut mine on the Flux Beamo CO2 laser using the standard 3mm fabric settings. A diode laser may also work. A fiber laser has difficulty on lighter colored fabric. Cut from Cordura 500,…
This model represents a level five iteration of the Sierpinski Pyramid fractal. Instead of being made up of individual octahedra, it’s constructed from a unique shape with extra faces, creating a bold, wicked appearance. This version…
Capture a moment of focused precision with this 3D printable STL model of an Atlanta Hunter. This skilled archer figure is perfect for adding a dynamic and adventurous element to your displays or tabletop gaming scenarios. Usage & Links…
I am not a 3D expert, nor a carpenter. I am giving it a try. Just made this alignment device. you can install one of those DIALs to check the BLADE ALIGNMENT. Hope it is useful (it was to me). I printer in PLA (sunlu). Using 25% infill. 3…
So the anycubic kobra s1 bed comes terribly leveled out of the box lot of times. This simple tools helps manually level all there bed point ( front left and right and back middle) where frame is connected to z motion system by the way of…
Keep your phone safe, steady, and smiling with this phone stand! 🪷 Perfect for your desk, nightstand, or office, this stand is both functional and fun. Get it printed for you. Click here to purchase the actual print only.
This is a modification of the original Voron trident skirt but modified for voron 2.4 with 40mm extrusion.
Remixed Hartvik 's model. Now you can print the model in upright position (better orientation in my opinion) and also without supports.
Just a Jaoba skin cuz y not? Same Build instructions as OG Gravemorne
This is just a remix of character board. For the rest of the models, please see the original creation.
Replacement sole pad for the Nordica B7 ski boots. Added also Fusion360 source file, if you would need to adapt a little bit… Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: Yes Resolution: 0.2 Infill: 40%…
selfie stick ski pole mount (insta360) with 5 mm nuts and compatibility with ski poles with triangular section. Print with PETG, ABS or similar materials. V2 reinforced. Included stl: clamp body Collet and cover must be downloaded from…
I bought some Rossignol Tactic Ski Poles and wanted larger baskets for them. This is a quick design, nothing fancy, print it upside down and there is no need for supports. The pictures show an earlier version, the current version (v8) has…
🏔 Modular Ski Strap A 3D-printable ski strap concept — designed around Titan Straps, M3 hardware, and standard heat-set inserts. Built to handle cold, abuse, and all while being easily repairable. Print it, bolt it, strap it — and you’re…
Most of the designs on here are for 32mm posts. These are designed for 30mm ones. If you don't know your size, use some digital calipers to find out. Printed at 0.2mm layer height in PLA at 20% infill. They work with no issues. The…
Tool for Edge Tuning Made in PETG 60% infill for stiffness and weight Upgrade with Clip and threaded insert. Step file with both pieces. Split as objects! Threaded inserts, M4 screw and washer needed ;)
I made spare tracks for the LESU rc skid-steer, because it had to much grip on carpet or hard surface with the original tracks. Due to the high grip level of the original tracks, they often slip off the wheels when i turned the loader.…
This model was designed to solve the age old problem of messy Skip-Bo games. While many card trays are already available to download, none of them seem to have thought about storage or transport of the cards, meaning you'd have to store…
Simple Ski holder for the roof. Bindings between rafters. I used PETG for the print. PLA will probably not work if the roof gets hot. PCTG, ASA or ABS might be a an even better choice. No bottom or top layers for me, looks cool with…
Free copy of original landing skids - arms. Needs landig skiis, 6mm pipe.
Note: the press-fit is sensitive to pressure advance and printer dimensional accuracy. (You can also use the negative shape slicer tool to add labels)
For those who, like me, tend to crash their RC helicopter just when the spare parts are out of stock. I modelled a replacement landing gear for my favourite helicopter, thinking that I'm going to need a few more in the future. Besides,…
Updated Whity's Fuzzy Skin test to include the new types of fuzzy skin Orca added. Each fuzzy skin type has 16 different point distance and skin thickness values. The skin types are embossed on the bottom of the samples: C = Classic P =…
Skimmer basket to suit a nally skimer box. Pretty generic I imagine you could use it in various pools. Just paint on supports under the rim.
Hey there, I redesigned “Voron Front skirt for Trident/2.4 (Headless) No screen” so it fits 250 mm printers and made it easier to print it with 2 colors. Also Fusion360 file is included so you can make different logos. Hope you like it.
Hey there, These are yet another Voron skirt buttons, because i didnt like any other buttons. I used keyboard MX switches so the feel of pressing the buttons is superb. The assembly should be very easy because its all just press fits you…
This convenient ski boot handle is designed to be easy and quick to print, and allows the user to conveniently carry both ski boots with both hands. It can be printed from PLA as long as an infill of 25% or higher is used. An infill or…
Cookie Man ( EASY PRiNT 0% INFILL - FUZZY SKIN ) Need Support EASY PRINT 0% INFILL CHECK MY OTHER MODELS WITH 0% INFILL https://www.printables.com/model/1501315-santa-claus-with-gifts-easy-print-0-infill…
A mobile stand that I bring on my ski trips to do some basic tuning on my edges. I use it together with a pocket sharpener from Swix. You also need a strong rubber band to get you ski stoppers out of the way. Print the model standing up…
Elevate Your Skincare Setup This is a Gridfinity-compatible serum holder designed specifically for skincare enthusiasts who want to organize their vanity without sacrificing aesthetics. Unlike standard flat storage blocks, this model…
This unique skirt features a multi-level construction, offering versatile style and comfort, and is intricately designed to include spiral connectors for a corset-style closure. Ideal for cosplay, LARP, or fantasy enthusiasts, this skirt…
I'm a big fan of using glass eyes on my prints. I remixed this adorable skink to be compatible with 6mm glass eyes. It really brings the little fellow to life! Printed with no supports. Happy printing! :) Feeling generous enough to buy me…
This is my take at a simplistic home winter decor print. I wanted to try something a little outside the box and something that I can keep up the whole winter season. This was 100% designed in fusion 360 and it was a real challenge. The…
Uchwyt do pasków na głowę sam wykorzystałem paski od starej latarki czołówki, zdaje egzamin.
Cordless tool battery adapter. Skil PWRCORE 20 Battery to Makita skins Extra hardware wire 9mm female fuse terminal x2 female fuse terminal x1 6mm male spade connector x2 M3 x10mm bolt & Hex nut Assembly should be self explanatory, reach…
I created these tools for mounting my DJI Action 5 Pro camera on a kayak. There are connectors of different sizes, and a special one that takes into account that the lens of the camera is not in a centered position. I took care to make it…
Custom-designed intake strainer for the pump of the Tunze DOC Skimmer 9415. The part serves as a protective suction basket, preventing debris, livestock, and larger particles from entering the pump while maintaining adequate water flow.…
Skis for Aeroscout S2. Thanks to RonStG for the mounting part. use the heat from the heatbed to curve the front of the skis. go check out RonStG on thingiverse! https://www.thingiverse.com/RonStG/designs You can use a rubber band through…
This practical, U-shaped ski brake retainer conveniently holds ski brakes out of the way for edge tuning or waxing. Inspired by the one mady by LG-sports. Note: I got the feedback, that it does not work with all bindings. So I can't…
Ratskin Ganger with axe and gun, this Ratskin scout keeps watch in the depths of the Underhive. This miniature is part of the Underhive Minis collection — inspired by the gritty skirmishes and survival stories of the undercity. Designed…
Print with tree supports. The mount for the attachments is brittle, and blade may pull apart once broken free, just slide it back together.
This skid steer loader is modeled after the classic Czechoslovakian UNC 060, a machine still commonly found on construction sites today. Its timeless design makes it a perfect addition to layouts from any time period. The kit comes in…
Material: 110 g TPU A95 Druckereinstellung: Layerhöhe 0,2 / Infill 90 % honeycomb / Wände 4 / Schichten 5 oben, 5 unten / with Support Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be happy about a like.
I needed a quick fix to cover the edge between the wall and the floor beneath a window, and the same in the kitchen, where a backboard meets the cabinets. This is a base file: you can adjust the length and height in PrusaSlicer by…
Sacrificial skidplate for the bumper found here: https://www.printables.com/model/1569599-torque-bumper-for-xr NOTE: V1 is discarded. V2, just like V1 is a horror to print due to the large chamfer. V4 is better printable but not optimally…
Designed to hold one Skip‑Bo card set with plastic sleeves. There are indentations on the inner walls, so the game manual will also fit inside the box. There are holes at the bottom and at the end of each section, which, in my opinion,…
I replaced the front wheels with this ski, and it worked with out changing the drive train. I just took the drive nut off and let the axle spin. To get the other ski, you will have to mirror it in the slicer. Printed in pla with supports.
This skid plate was designed to help protect the servo. it also helps things not get hung up on the servo. It clips onto the front stock bumper of the scx24. I used a piece of tape to keep it from sliding sideways. Printed with supports…
This model is compatible with the lego system.
This is an improved speed bar skid for Moyes Litespeed RX gliders. It has been tested and tweaked to be a tight slip-on fit for the Litespeed carbon fiber basetube. It helps to keep your base tube out of the gravel during setup or while…
I redesigned the great ski clip by Leftcetio to fit larger backcountry skis. Specifically this fits Rossignol BC 65s with LL Bean poles. Works great, though slip them on rather than push them on as they slot is a little tight and can…
![Rollerski (Skiroller) and poles carry holder [OpenSCAD]](https://media.printables.com/media/prints/1067432/images/8075867_116facf1-d862-494a-a027-1216254b6951_ff1b5bc4-f6d3-4edc-90fa-da83c27c6821/photo_3_2024-11-08_16-18-26.jpg)
