BigBricks Wall Mount Leia Skirt
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for the Lego inspired 6 to 1 figure Princess Leia from BigBricks with the skirt piece from Mathew Roth
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 50
- Makes
- 0
- Views
- 483
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
One of our guys on the BigBricks discord came up with a very nice Leia Skirt model suitable for BigBricks Lego inspired 6 to 1 of princess Leia.
The skirt model can be found here:
https://www.printables.com/model/874753-skirt-piece-for-big-bricks-61-figure-with-leia-pat
Since I already did different wall mounts for all the other available BigBricks figures, I had to do one for this great model as well.
It works specifically for the optional Leia Skirt model, but is interchangeable with my R2D2 and regular BigBricks wall mount (you can find that under my models) as it uses the same screw distance.
You can switch Leia's Skirt wall mount with the regular and R2D2's wall mount and vice versa in case you want to put your R2D2 or regular to another spot without the need of drilling new holes.
For mounting use 2x 4,5mm Spax screws or similar (5mm hole / 10mm countersunk, 50mm screw distance).
Printed in Prusament PLA Galaxy Black
0,2mm IS Structural
3 perimeters
5 bottom / 5 top layers
15% Grid infill