1 / 6
Card sorting tray, fits penny sleeves, and 3"x4" top loaders
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sliced print and enlarged 120% from the original. This print only holds 6 slots in a 2x3 orientation. Fits larger cards.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 537
- Wydruki
- 2
- Wyświetlenia
- 1844
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (52)Powiązane
Print tips, I used a brim inside and outside as the original file looked like it was warping on my printer. I printed gyroid at 10% infill and first layer about half the speed of the default speed of my printer.