Liczymy pasujące modele…
Update 18. 4. 2023: added 68x44mm card version (print big wheel 2x - there is not middle one). I don't have small cards and confirmation it works fine - please see discussion)…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
Playing Card Case made for double deck. Lid fits quiet well on the base. Inner space is 59x89x18mm. Enough space for various types of playing cards. Files with 19 at the end has inner height 19mm. For printing, I recommend 3 vertical…
Wydruk około 5,08 €–6,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a play card holder for the little hands of my kids, that are not able to hold many cards. I designed it with two rows and enough space between them for easy grabbing of the front cards. Most holders with two rows are too tight in…
This is a Case for Raspberry Pi boards. Designed to work with a 28mm marine USB and/or HDMI extender, and a 12mm momentary 12vdc switch with LED, neither are required for use. Uses 10mm magnets, and standard M3 hardware. Glue nuts in the…
Looking for a deck of cards that fit into an Altoids tin? Find it here: https://www.printables.com/model/1115163-altoids-friendly-playing-cards Based off my design for Altoids-sized cards, I decided to also create “standard sized” cards…
Harp Playing Gnome – A Little Melody for Your Prints Bring a touch of calm, charm, and old-world magic to your collection with this Harp Playing Gnome . Seated peacefully with her harp, this gnome feels like she’s paused mid-melody,…
How to change size - 1 - measure your playing cards size 2 - open the f3d file in fusion 360. 3 - press s to open the search box 4 - enter “change parameters” to the search box 5 - enter the measured size of your playing cards to the…
Because the original measurements weren't fitting my cards, I've modified the model. Now there are parameters in the fusion360 file for the heigth, width and length of the cards. The case then adapts to your measurements. Addiotionally…
A playing card box with a very cool looking lid. Would print in three separate pieces because of stability issues, Would not print the live hinge in ABS - to brittle. Holes in the lid are designed to fit a threaded insert - 6mm x 5mm. Use…
For info on the print settings I used and a list of other game organizers I've made, check out this model !
Ideal for playing exploding kittens while traveling
Uhh kinda learning bout gears yk...
I remember my Montessori elementary school from 55 years ago: We had wooden square-sticks of different lengths and colors and were supposed to find combinations which result in equal total lengths. These sticks here are meant to replace…
Inputs: Size of your deck of cards Size of your nozzle's extrusion width Output: Model: Lid and base Friction fit Prints in vase mode (plenty strong with a .8 nozzles) Grabby edge to make it easy to take apart Additional info: In the…
Print with 0.4 mm nozzle, 100% infill, first layer height 0.16 mm and the rest of the layers 0.08 mm. Start with black and at layer 11 change to white.
A clean and simple 3D printable box designed to store a standard deck of playing cards. This model is ideal for keeping cards protected at home or while travelling. The design is minimal, sturdy, and prints easily without supports. Fits…
Here I designed a card holder for my wife who has 400+ board and card games because we couldn't find one that checked all our boxes. Most card holders we find online are curved and can easily end up damaging the cards. Others have high…
A festive Christmas version of my chibi gothic cellist, wearing a fluffy Santa hat while playing her cello. The mix of spooky-cute and holiday cheer makes this a perfect seasonal display piece for desks, shelves, and Christmas scenes.
Looking for a deck of cards that fit into an Altoids tin? Find it here: https://www.printables.com/model/1115163-altoids-friendly-playing-cards Based off my design for Altoids-sized cards, I decided to also create “standard sized” cards…
Print with 0.4 mm nozzle, 100% infill, first layer height 0.16 mm and the rest of the layers 0.08 mm. Start with black and at layer 11 change to white.
Playing Card Case made for double deck. Lid fits quiet well on the base. Inner space is 59x89x18mm. Enough space for various types of playing cards. Files with 19 at the end has inner height 19mm. For printing, I recommend 3 vertical…
Wydruk około 5,08 €–6,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Playing Card Holder for the LCG Arkham Horror. It holds the allowed maximum of 8 cards. The cards in the front row tilt forwards, so that the information on the cards behind can be read. The front can be customized with a badge. Use one…
There are so many card boxes out there… But none could do all I wanted. Let me show you its features: The box Actually protects the cards for travels - no holes and fairly strong Fits a stack of gold plated or similarly rough plastic…
I've been looking through the Internet for some design to display my bloodbowl teams on a shelf while not letting dust cover my miniatures, and not found anything that convinced me enough, so I went freecad full on and done my most…
I remixed the model to have the inner dimensions of 64.1 x 90 x 19.8 mm, which perfectly fits my set of French-suited playing cards, which should be the standard size. I did this because for me, the original was a little bit too large to…
I tried 0.4mm deep recesses for the feet, which I figured would be two layers, but they were too shallow, only served as visual markers where to put the feet, I don't think they'll keep the feet from ever being knocked or peeled off. I…
Do you also have a card game but your box is broken? Here’s the perfect case to keep your cards safe. Also fits perfect for the famous card game with the three big letters. Made for 112 cards. Enjoy!
Capture the playful innocence of the wild with this 3D printable STL model of a Cute Bear Cub Playing. This adorable forest friend is perfect for adding a touch of joy and woodland charm to your displays or miniature nature scenes. Usage…
Capture the stunning beauty of this majestic bird with this 3D printable STL model of a Cute Peacock Displaying Feathers. This eye-catching figure is perfect for adding a touch of exotic elegance and vibrant color to your displays or…
A friend of mine collects baseball cards, seriously. He asked me if I could design a stand for his more valuable cards that are in cases. This is what I came up with. Simple to print in PLA with a 0.4 hotend. You can print dozens on a…
I was originally drawn to this model because of the hexagrid details (I mean, who doesn't love hexagrid?) but as I started exploring the model I found some inconsistencies and a design choice or two that were tripping Fusion360 up when…
Building a house of cards is a fun challenge that most of us have tried before. I wanted to capture the simplicity of that, with a little sprinkle of design and ease of use. What if I can make it just a little bit easier to build, while…
EN This is a simple two part case for playing cards. Pack height max 11 mm. Size of the card 61x103 mm (Dino Toys size). Designed to be tight fit, but may wear over time so may become a bit loose. Tested with 0.15mm layer, 0.2mm layer…
Use the plastic of your choice. Printed all pieces with 100% infill to give them a bit of weight. I used a .4 nozzle with .15mm layer height. Supports recommended on the Bishop, Queen, King and Knight overhangs.
I wanted to have a place to store 2 decks of playing cards to use when playing poker of other card games. it features a slot and groove locking mechanism to keep the top on even when upside down. ---UPDATE--- 27/02/2026 Added two more…
Made this to store playing cards from various games. 1st version is made to fit standard playing cards - cca 90 x 64 mm 2nd version (visible on photos) is made to fit cards with card sleeves - 94 x 67 mm
My dad wanted a new case for his 2 Canasta decks, so I made a simple design that doubles as a case and playing tray (so that you can play with the wilds). The tolerances are a bit tight purposely, I didn't want the lid to pop off easily.…
Carrying and playing case for Uno Go. One side can be used to hold the deck and the other the played card pile. Keeps cards in place while on the go in vehicles or public seating. This is a remix of Flat Stick's Uno Go Playing Case. I…
SnapDeck is a clean, minimal playing card holder designed to print in just 21 minutes while securely holding a full deck of standard cards. It’s perfect for keeping cards organized during game night, storing decks on a shelf, or holding…
This holds a stack of blank playing cards and has a simple stencil for creating a lined list with checkboxes. It is a super simple, but completely functional and nice looking setup. I use blank uncoated playing cards like these:…
This project is a 3D printable deck cover designed specifically for standard Napoletane playing cards with dimensions 53 x 84 mm. The cover protects the deck while maintaining a lightweight, breathable, and visually distinctive design…
Playing cards display. Suited to fix Bicycle decks. Fits 4 decks each.
The Book file should be printed with a brim in the orientation the file comes in. Supports are not required, but it may turn out better with them. The Pages file does not need supports or brim. This only looks like a book, it does not…
Harp Playing Gnome – A Little Melody for Your Prints Bring a touch of calm, charm, and old-world magic to your collection with this Harp Playing Gnome . Seated peacefully with her harp, this gnome feels like she’s paused mid-melody,…
No support needed. Print the lid upside down and everything else with normal orientation You can use the pins or 6x M3 30mm screws
This is a fully parametric card box and caddy . I have been making a few box's for different card sets and got annoyed editing each file to fit, so I decided to start from scratch with a parametric model. What this means is that you just…
A print in place box meant to hold two decks of standard playing cards. The hinges require that the material has good layer bonding, so PETG is recommended. The tolerances have been tested on a Prusa Core One and comes of the buildplate…
Now Playing! Easy wall mounted Record/Vinyl/LP Display Shelf Easy two part print, just glue together and attach to your wall with your favorite screws! Nubbins for proper alignment included. The " Now Playing " faceplate can be easily…
This is a click on monopoly deal box that stores the cars inside and doesn't need a multi color printer to print the deal logo which just slots in the lid.
The Wizard represents ancient wisdom and arcane mastery. Featuring a deep hood, majestic beard and detailed drapery, this bust embodies magical authority and mystical presence. Model Highlights: Hood with sculpted frontal symbol Long…
This is a fully parametric playing card deck box designed in Fusion 360. The model allows you to adjust the internal width, height and depth to fit virtually any card deck — standard playing cards, board game cards, or custom formats.…
A compact, snap‑latch storage case designed specifically for standard playing cards. Please like if you download or print it! The internal volume is 20 mm (W) × 65 mm (L) × 90 mm (H). It fits standard cards very well, leaving about 1.5 mm…
🧙♂ Healer Cleric – Role-Playing Series Here is the Healer Cleric , part of my dedicated role-playing game character collection. This sculpt represents a spiritual master and divine healer, holding a sacred staff and mystical orb, ready to…
To sell my creations, you can find commercial licenses on my Patreon: ZaphkielCreations Here is the Bard , a charismatic character from my role-playing collection. A traveling musician and storyteller, holding his lute with confidence,…
To sell my creations, you can find commercial licenses on my Patreon: ZaphkielCreations Here is the Flesh Chimera , a nightmare entity from my fantasy and role-playing collection. A creature stitched together with scars and reconstructed…
To sell my creations, you can find commercial licenses on my Patreon: ZaphkielCreations Here is the Mind Flayer , a terrifying psionic entity from my fantasy role-playing collection. With its elongated skull and sculpted facial tentacles,…
Here is Warrior v.3, a more mature and detailed version of my fantasy bust. This seasoned warrior embodies strength, discipline, and honor. His focused expression, meticulously crafted beard, and textured armor add depth and realism to…
This is Mage v.1, a mystical embodiment of arcane power. Hooded, focused, and imposing, this mage wields a scepter adorned with a blazing crystal and a magical sphere charged with energy. The textured beard, armor embellishments, and…
🛡 Captain of the Guard – Role-Playing Series The Captain of the Guard represents discipline, authority and military honor. Featuring a decorated helmet, sculpted armor, noble cape and engraved chest emblem, this bust embodies leadership…
My first magnetic connection ;) I designed this magnetic deck box to store a standard bridge-size deck of playing cards. The lid fits over the base and uses four small 4×2 mm magnets to keep everything securely closed. A thumb notch on…
Holds 4 decks of half-sized playing cards. My daughter has a Kid's Jeopardy game that has 4 decks and it comes in a simple box that does not keep the decks separated.
I made this stand for my 5 year old to help him play card games with his siblings. It holds up to 10 cards and will stand on a table and is easy to hold; allowing small hands to hold all the cards. Printed in PLA, 0.4mm nozzle and 0.2mm…
Famous picture of Elvis,Maralyn,Humphrey and James Deane at the pool hall the steps for changing the filament are in the Elvis describe file. Hmmm.... it had better resolution on the computer. I did not have the correct transparency…
Really just wanted a plain ol' black spacer to use with my mod. Printed this on my X1C with a 0.2mm nozzle. If you're using a different sized nozzle, you may end up needing to sand or trim a bit, but I didn't need to. Printed with the…
Holds two stacks of standard size playing cards. I would recommend 10% infill.
Be careful removing the supports. You will have to clear the feet really well in order for model to stand but not to much or it won't. I had to add a little hot glue to build it back a little, in order for model to stand.
I don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" This is really just a simple card box. This does look really similar to another model made by a different user but…
Just a funny little thing I made to make myself, and maybe other people happy :D it is a .3mf file, so it should work. (i used tinker cad, and I barely know what i'm doing :3)
got the idea after using Zack Freedman's Gridfinity Storage System. printed some light grids and created floor/wall sections that can be dropped in and rearranged to create any dungeon / spaceship layout for minis to fit in i have…
These are the resource and development cards for the base game of Catan. These are all multi-part step files. The cards are designed to be printed at .1mm layer height. The first layer can be .1mm or .2mm and the total card thickness is…
This collection provides magnetic trays and parts for a magnetic clipboard for your roleplaying adventures. You need the following magnets 10mm diameter and 2mm thickness. Simply glue them in with CA glue. Update 1: First suggestions from…
Normal playing cube, it work on normal playing cube. Please download and like it 🥺 I want prusameters😸
Remix of llama_'s playing card display stand to showcase only 1 column of decks. Printed with 0.2mm layers, PLA, 10% rectilinear infill.
a cute and lovable version of the fan favorite Bonnie the bunny
I really like @Markus_p's various card boxes based off @whity's Rugged box. It works great for UNO and other cards which are the narrow style. It didn't however work for Bicycle Playing cards and I really wanted to use it for these. Remix…
I was going through my creations on TinkerCAD.com for some house cleaning. We were playing card games with many cards. These were design to interconnect with a washer. If you are interested, I have an OpenSCAD of a parameterize “Deck…
The stock d-pad on my FPGBC could be pressed down activating all directions at the same time. This made playing games like Tetris very frustrating. I would be pressing left or right, and it would often register up, causing a hard drop. I…
Nice inflatable boat for playing in the bathtub or pool
A 3d model of a classic playing card tray that i modeled in Fusion 360 and ZBrush. Very practical when you play your favorite card game with friends and family :-) Hope you like it, have a nice day and thank you for stopping by my model !
Deal yourself a winning hand with this 3D printable Playing Card Keyring! Perfect for card sharks and jokers alike, this stylish accessory is a great way to add some flair to your keys. Show off your make! Hey, card champs! Made this?…
This is a remix of the design by Adam Miller. I was looking for a box that would hold my canasta cards, and really struggled finding anything I liked. I remixed it, adding the word canasta and then printed some card decals which i stuck…
This model is designed to display your Cd cases and show what is currently playing. also this model has a ergonomic Design with most the corners rounded. !!this model is not the final faze and i may make a better one later in the future!!…
Print two. Slot together. Place on flat surface. Add playing cards (in the box works best). Enjoy! Simple card stand that is quick to print. The idea behind it was that as little as possible of the stand is visible. This works well for…
fully parametric playing card box with space for instructions and a label on the outside
I designed this two part case as I needed something to protect my old and battered playing cards as I carry them pretty much everywhere. There is an inlay but as I do not have a multi-material printer I had to get creative but as this was…
Update: Added "no design" version of the box A simple box for storing Bicycle playing cards. My print settings: Resolution: 0.2mm Infill: 20% No supports needed I printed this using Devil Design Black PETG (I also attached the gcode…
Included are some sample files - Cards Against Humanity - Australian Edition Question Cards, and one for a regular Queens Slipper card pack. Prints should work with most rigid materials, might work with TPU but would be best with…
