Playing Cards holder remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have made this remix of Firestorm0708's playing card box because his box is for large card.
- Ocena
- 4 / 5
- Polubienia
- 48
- Pobrania
- 381
- Wydruki
- 5
- Wyświetlenia
- 3123
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Print instructions
Category: Games Summary
I have made this remix of Firestorm0708's playing card box because his box is for large card. My needs was for smaller playing cards, like sized 59x80 - 52 cards max.
I change some littles details :
- i have added a personal support in the hole of the box. You have simply to snap this support after printing. the box body not need supports to be print.
- i cut a little the pins to print them on the long way to have more stiffness and not need supports
- i replace magnet round hole on top's box by hex hole. I have used M3 nuts in front of magnets. It's enought to close the box and less expensive.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
10%
Filament:
cf notes (not on amazon !) PLA body : grey - top and pins : red and blue (for two differents boxes)
Notes:
Filament Brand : sovb3d (french filament brand)
with the slicer, you have to turn pins on their flats surfaces and return the top part at 180°. Then you don't need supports to print those parts.
Post-Printing
on body part, you have to snap support on axes holes.
I have used gently a little pliers and they snaped !