Playing Cards holder remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have made this remix of Firestorm0708's playing card box because his box is for large card.
- Rating
- 4 / 5
- Likes
- 48
- Downloads
- 381
- Makes
- 5
- Views
- 3,123
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Print instructions
Category: Games Summary
I have made this remix of Firestorm0708's playing card box because his box is for large card. My needs was for smaller playing cards, like sized 59x80 - 52 cards max.
I change some littles details :
- i have added a personal support in the hole of the box. You have simply to snap this support after printing. the box body not need supports to be print.
- i cut a little the pins to print them on the long way to have more stiffness and not need supports
- i replace magnet round hole on top's box by hex hole. I have used M3 nuts in front of magnets. It's enought to close the box and less expensive.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
10%
Filament:
cf notes (not on amazon !) PLA body : grey - top and pins : red and blue (for two differents boxes)
Notes:
Filament Brand : sovb3d (french filament brand)
with the slicer, you have to turn pins on their flats surfaces and return the top part at 180°. Then you don't need supports to print those parts.
Post-Printing
on body part, you have to snap support on axes holes.
I have used gently a little pliers and they snaped !