Dragon Burner v0.831 for Voron Trident and 2.4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dragon Burner for Voron Trident & 2.4, Orbiter v2.0 extruder and Dragon compatible hot end. It's being tested now.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 227
- Wydruki
- 0
- Wyświetlenia
- 2937
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Orbiter v2.0 extruder, Voron Trident with Dragon compatible hot end, Dragon Burner for 2.4.
Improved heat dissipation from the hot end.
For Orbiter v2.0 mount, please refer to the link here
< Filament >
ABS recommended.
<< History >>
- V0.831 [02/21/2025]:
- Fixed an issue where polygons were incorrectly created when exporting fan cover stl.
- V0.83 [02/19/2025]:
- The groove depth has been increased to better accommodate the 3010 fan.
- V0.82 [02/16/2025]:
- Increased vertical height to ensure proper placement of 4010 fan.
- Redesigned to fit the height of the left 4010 fan wires.
- Modified to allow mounting of LED on top voron symbol.
- V0.811 [02/06/2025]:
- Fixed the issue where the 4010 fan was not aligned correctly with the front of the fan cover.
- V0.81 [02/05/2025]:
- Modify fan cover cable tie hole
- Added cable tie holes for heater wire and temperature sensor wire
- Clean up the sharp edges of the cable groove on the fan cover.
- Modification of the air vents of the hotend guider
- V0.8 [02/04/2025] :
- model upload
Dragon Burner Source :
https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner
X Carriage Source :
https://github.com/VoronDesign/Voron-2/tree/Voron2.4