Compact Right Angle Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An approximately 3"x3" Right Angle Clamp that snaps together in minutes. Comes in 0.5" and 1.0" wall height.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 500
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Right Angle Clamp comprised of 5 separate printed parts that snap together to encapsulate a single m4x50mm Socket Head Cap Screw and nut to temporarily hold two boards together at a right angle. Can Hold boards up to ¾" thick. Current configurations include a 0.5" wall height and 1.0" wall height. (edited: sorry, I had 25mm, it needs to be 50mm)
Some Features include:
-Viewing window at corner to allow visual inspection and ensure no lateral misalignment of boards.
-1/64" Fillet wedge tip and outer wall relief slit to provide a flush corner connection without any miscellaneous printing corner fillet interpretations.
-Bevel cut connection edge reference line on top of slide.
Non-printed items:
-(1) m4x50mm Socket Head Cap Screw (edited: sorry, I had 25mm, it needs to be 50mm)
-(1) m4 Hex Nut
(I purchased the Iexcell m4 675 pcs kit)
Recommendation:
I encountered minor speaking due to plastic rubbing inside the knob recess that was remedied by a little synthetic grease.