Compact Right Angle Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An approximately 3"x3" Right Angle Clamp that snaps together in minutes. Comes in 0.5" and 1.0" wall height.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 90
- Makes
- 0
- Views
- 500
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Right Angle Clamp comprised of 5 separate printed parts that snap together to encapsulate a single m4x50mm Socket Head Cap Screw and nut to temporarily hold two boards together at a right angle. Can Hold boards up to ¾" thick. Current configurations include a 0.5" wall height and 1.0" wall height. (edited: sorry, I had 25mm, it needs to be 50mm)
Some Features include:
-Viewing window at corner to allow visual inspection and ensure no lateral misalignment of boards.
-1/64" Fillet wedge tip and outer wall relief slit to provide a flush corner connection without any miscellaneous printing corner fillet interpretations.
-Bevel cut connection edge reference line on top of slide.
Non-printed items:
-(1) m4x50mm Socket Head Cap Screw (edited: sorry, I had 25mm, it needs to be 50mm)
-(1) m4 Hex Nut
(I purchased the Iexcell m4 675 pcs kit)
Recommendation:
I encountered minor speaking due to plastic rubbing inside the knob recess that was remedied by a little synthetic grease.