Dell OptiPlex Micro Under-Desk Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Under-Desk Mount for Dell OptiPlex Micro
- Ocena
- 4,625 / 5
- Polubienia
- 98
- Pobrania
- 1385
- Wydruki
- 8
- Wyświetlenia
- 3449
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This 3D-printed mount is designed for Dell OptiPlex Micro PCs with the following dimensions:
Depth: 178 mm
Height: 182 mm
Width: 36 mm
This should cover most, if not all, of the OptiPlex Micro Models.
I designed & tested it on a 7000 series model.
The mount allows you to securely attach your OptiPlex under your desk (or anywhere you want) with 4 countersunk head screws, saving space and keeping your setup tidy.
Features:
Endstop & Clip Mechanism: The built-in endstop and clip securely lock the OptiPlex in place, preventing it from falling out.
Two Versions Available:
Standard Version: Sturdy and robust for maximum security.
Version with bigger Cutout: Saves a bit of filament but requires multiple support blockers in your slicer.
Printing Recommendations:
Material: PLA, PETG.
Supports: Enable supports for the clip (see attached screenshots for guidance).
Infill: 15-20% is typically sufficient.
Perimeters: I like to print with 3, 2 should also be fine.
Edit 29.06.2026:
Added versions without the 'island' on the screw holes to allow flat printing. Thanks to @saporra_209519 for pointing this out.