188 modeli
This is designed specifically for a Dell Optiplex 7060 MicroPC, though it may be possible that some similar era Dell micros may fit in here too (the model in picture has an i7-8700 for a hint of its age). As you can see, I got a little…
This Dell Optiplex Mount is a versatile and compact solution designed to securely mount a Dell Optiplex 340M Desktop Computer to a 19" server rack. its design only takes up 1U of rackspace and allows you to mount 2 of them next to…
These parts are an alternative to the normal 2.5" caddy compatible with a smattering of Dell Optiplex Tower systems. I tested these models in a few Dell Optiplex 7060 Towers, and the printed parts had an excellent fit. Update 2023-12-13:…
This 3D-printed mount is designed for Dell OptiPlex Micro PCs with the following dimensions: Depth: 178 mm Height: 182 mm Width: 36 mm This should cover most, if not all, of the OptiPlex Micro Models. I designed & tested it on a 7000…
10" Rack mount for optiplex micro mini PCs
Rack mounts for Dell Optiplex to mount to a 10 inch mini rack with keystone jacks. Edit: V2 Strengthened and optimized. Print in PETG
If you like my work, tinkering and messing around with stuff. Then please consider supporting, it would be greatly appreciated! I'll be looking forward to interact with you guys and our shared passion for making! :)…
This is a VESA monitor mount for the Dell OptiPlex Micro series PCs. I used it with a OptiPlex 7060. Can be mounted vertically or horizontally as hole spacings are 100mm. I remixed this from Elppa8's version so that the bottom cleared the…
Build this to add spaces between each piece. It might need some cleanup after printing, as the space tolerance isn't perfect, but it is doing the job. It should be compatible with other Dell OptiPlex Micro models as well, but try it out…
A really simple vertical stand for the Dell OptiPlex 3050. The PC just slots in and the stands prevent it from tipping over.
Stabile stand for Dell Optiplex 3060 series PC - vertical position.
I created this so I could mount some Dell Optiplex 7040 USFF (Micro) PC's under a desk, may suit other Dell, HP and Lenovo machines. I printed from PETG-CF and is plenty durable, I'd recommend using PLA+ or better. I desined this to pint…
Elevate your Dell Optiplex 3050 Micro with these custom 3D printable model files designed to accommodate an MSI RTX 3050 LP graphics card. This set includes: 3D Case : A custom-designed case tailored for the Dell 3050 Micro, providing…
10" Rack tray to hold a Dell Optiplex 5070 (although other Optiplex models should fit) but also with an option to add a keystone jack (see my other models if you want to test print the same port to test). ** NOTE: These Rack components…
This adapter is tested with a motherboard from an Optiplex 3050 SFF, but it should be compatible with any SFF Optiplex motherboard from 2015 or newer. A reference image of a compatible motherboard is included. Printing Printed with 20%…
just a quick design to fit the optiplex 390, 790, 990, 3010, 7010, 9010, 3020, 7020, and 9020 series of computers. it will probably fit others, but the optiplexes were what they were tested to fit.
Off-lease business computers are one of the best ways to get decent (if slightly older) hardware for cheap. I grabbed a optiplex 7040 with a i5 6500, 16gb RAM and a 512GB SSD for less than $150. The down side is that the OEM PSU isn't…
Simple Under desk mount for a dell 7080 Micro
I needed some brackets for the Dell Optiplex 3020M SFF PC, I found 1 other design but it didn't fit and wasn't exactly what I needed, so I designed this. Its Simple and effective. one bracket will hold it up but two is safer! Printing:…
Under desk quick print mount for dell optiplex micro (may work also with HP Mini and Lenovo Tiny series PCs)
The factory HDD caddy for the Dell OptiPlex 9020 Micro only fits a 9mm drive. This is a custom version designed to fit a 15mm drive. I’m reuploading this to Printables so more people can find it, as it took me three hours to discover that…
I have a Dell Optiplex 7050 Micro with no faceplate and no power button. So I rebuilt it. Optimized print profiles for Bambu Lab printers available here:…
This is a small rack designed to hold 5 Dell Optiplex MFF servers. Includes long shelves for the front, shorts shelves for the rear, 5 port patch panel and “shelf” for Unifi Flex Mini 5 port switch. I designed this to be a compact “rack”…
In my case it's an Optiplex 3020, but it's fine for other models. Print made in PETG with 100% infill; 2 washers are needed so as not to strain the plastic. Fixed to the wall with 2 wall-plug/anchor (6mm). A slot allows the use of a cable…
10" rack mount / shelf for Dell Optiplex Micro / MFF Series 5 with a hole for a keystone module. Models that should work: 3040, 5040, 7040, 3050, 5050, 7050, 3060, 5060, 7060, 3070, 5070, 7070. The rectancle on the rear right side is to…
Made this 3.5" HDD caddy for my Dell OptiPlex 3050, i wanted to add more storage but it only came with a small SSD. The screw holes might not match 100%, since i did not use them, its a tight fit and i don't plan on shaking my PC! also be…
I've designed a snap in holder for the Dell Optiplex Micro. No screws or anything aditional required to secure the device. For those who don't want the snap in feature or only want it on one side, I have added an open version for each side.
Update 5 - added Windows. Update 4 - added Central Control logo. Update 3 - added K3s and Ceph logos. Update 2 - added Unifi logo Update 1 - added Fedora, Nextcloud, and Docker logos Welcome! I love using the cheap Dell Optiplex MFF for…
An optical disk drive cover for the Dell Optiplex 5050 SFF
Designed a wall mount to fit the Dell Optiplex Micro PC that I recently got. My network setup is pretty limited where I live, and having space to run everything I want is even more limited. The only wired internet I can currently run is…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Transform your workspace with our custom-designed wall mount for the Optiplex 3050 computer. Crafted with precision, this 3D-printable model offers a perfect blend of style and functionality, enabling you to securely hang your computer on…
In total four parts need to be printed. They are on the bulky size, so reducing the infill might help with filament consumption.
Recently got a Dell OptiPlex refurb and the logo wasn't pristine. Gasp! Gave me the idea to model and print a new one. Since I installed Ubuntu on this machine, I thought it would be cool to have the Ubuntu logo on it. I've added 3…
Installs into the secondary display port, just above the built-in network and USB ports. Requires: 4x M3x4x5 heat-set inserts 2x M3x8mm countersunk screws Also uses 2 screws removed from the original metal bracket Potentially worth…
this is a drive 5.25" bay cover with grid for the DELL Optiplex 7010 it should fit the other models like 9010 etc. i arranged it that there is a continuous pattern in the form of the ventilation grille in the lower part of the computer…
This is a remix of uktricky’s Dell Optiplex 5070 with Keystone Port, redesigned for use with 12U server racks . It’s optimized to print on small 3D printers by breaking the model into more manageable sections. Assembly requires 8× M6…
I like the design of Hermann S for the Lenovo Tiny Mount. So I adapted the model for my Dell Micro 5050. It should also work for other Dell Micros. Print as separate bodies!
Ever thought about mounting a Small Form Factor Dell Optiplex 5070 motherboard in a full-sized tower? Do you dream of PCI slots not aligning correctly and needing custom adapters to make them fit? Are you an electronics hoarder itching to…
Basic wall or under desk mount for a dell micro pc, like to 5080 or 7080
With these caddies, 3x 2.5in SSDs can be installed in place of the single 3.5in HDD and low profile optical drive of a Dell Optiplex 7040 SFF. This will max out the available SATA slots on the motherboard, allowing for maximum storage…
I got such PC for experiments as home lab server and wanted to place it somewhere in the meter cupboard. Didn't found ready solution, thus designed my own. It need a pair of screws 4mm per each bracket for mounting (+ a pair of wall plugs…
The Dell OptiPlex 760 (and possibly other Dells) were made before SSD's were mainstream and thus the OEM caddy for the hard disk is purpose made for the big old bulky 5.25 inch hard disk drives. I found that a number of 5.25 inch to 2.5…
Lets you put two 3.5" hard disk drives in this small form factor chassis at the expense of the optical drive. Bill of materials: 4 M3x4x5 threaded brass inserts 5 M3 screws: one for to replace the stock large standoff, four to secure the…
This stand allows to raise your Dell Optiplex mini pc and get better temperatures thanks to the improved airflow. Ideally you would place it vertically (although there are rubber feet..), but you might benefit from this solution if you…
I wanted to save some space on my desk at work so I put this together quick so I could put it up vertically without the risk of tipping it over. It's a snug fit, and I bet it would fit other models. I suggest just using the measurement…
This is an adapter/caddy to mount an SSD (or any 2.5" HDD) in a Dell Optiplex. This should work with any 3.5" HDD trays that use the 4 prongs to mount a standard HDD. *Designed using the Dell Optiplex 9010's 3.5" HDD caddy. Print…
Vertical stand for the Dell Optiplex 3000 micro PC that incorporates a simple desk tidy. Photographed print printed in CF-ABS
Part requires significant flex to install, I didn't have any issues with pla +, but your results may very.
Slim desk / wall mount for an Optiplex 3080M (Micro)
Overview Adapter for the Dell stock heatsink to a 120mm PWM fan for the Dell Optiplex series 5 (2015-2020). (Check out wikipedia for an overview of optiplex generations). This makes the computer a lot quieter. The fan barely fits, so…
I used this in both an OptiPlex 7010 SFF and a 3020 SFF but it should work in other similar computers. The outer 3.5" holes are for the pegs in the 3.5" blue drive caddy thing and the inner ones for the 2.5" drive. The clearance holes are…
Rack 10" - 1U pour Dell Optiplex 7050 Micro En Fontion de votre rack je vous recommande de le fixer a l'arrière également ,le poid du dell 7050 peut etre important. joins en fichier l'extension arrière , mais a voir en fonction de votre…
4.30.22 - Updated Dimensions of Mounting Bracket. The old version didn't take into account the total width of the computer, plus the sides. It was short by 20mm which was the wide of the front and back plates of the mount. Should be all…
Dell Optiplex 3050 SFF 3.5" HDD Tray Adaptor Use in place of included 2.5" tray to run a 3.5" HDD Especially useful when using a m.2 boot SSD Printed and verified fit
Bracket and frame to mount a Dell OptiPlex 5080 small form factor computer on the wall. It consists of two parts. The bracket to fasten to the wall and the frame to attach to the computer. The idea is to re-use the wall bracket in case…
This bracket allows you to use the power supply out of a Dell OptiPlex SFF computer in a case which takes a standard ATX one. Despite its strange dimensions, its outputs conform to the ATX standard. You'll need 7 screws; 4 to mount the…
I'll start by saying I sincerely hope no other human being ever finds themselves building such a cursed PC. But if you're stuck in the same boat, at least I've got a tea cup to help bail you out. The motherboards in most Dell PC's don't…
https://www.printables.com/model/532449-dell-optiplex-3050-hdd-caddy/remixes this ^^^ but i fixed all the problems Tight clips Tight corners All fixed
A simple model I used for mocking up when designing a new homelab consisting of multiples of this PC.
OVERVIEW: While getting into the 10 inch home lab space, I opted for using a few Dell OptiPlex PCs from Ebay to run some of my services. Since the part is small and easy, I decided to make a replacement plate for the Home Assistant…
This is a vented cover piece made to fill the spot where the optical disc drive would be on a dell optiplex 3040 mini tower PC. It has the same pattern, angles, etc. as the rest of the front panel. this part can be 3d printed in as little…
Mount for Dell OptiPlex Micro (MFF) for under desk or wall use
10/04/26 Update Due to a few requests, I added a side-by-side version to hold 2 Optiplexes in a 1U rack. Welcome! While searching for a 19'' rack mount, I couldn't find any good models online that will work with my multiple different Dell…
DELL OPTIPLEX MT 70xx/90xx DVD bay cover with latch
This is a OptiPlex Micro (MFF) wall mount. Single and double mounts included. There is a slot to run a 1/2inch strip of Velcro around the Mini PC's to minimize sag and a screw hole to firmly attach them firmly to the bottom shelf. This…
I printed this on the Bambu Lab A1 Mini in PETG with supports on a textured plate.
Simple stand I created for a Dell Optiplex 7060.
General Information I produced this mount with a few design choices in mind. I wanted the faceplate of the mount to better accommodate wider 10-inch racks. The faceplate of the original model was slightly too narrow and the mounting bolts…
Custom 10" rack mount designed specifically for the OptiPlex 7090 Ultra . This mount includes a rear support bracket for added stability and cable management. Additionally, the front panel has space for 2 keystone USB modules and 2 RJ-45…
Cover for your Dell Optiplex if you remove the CD Player
This is a remix of a thingiverse file to fit 3 hard drives. I made an optional 80mm fan bracket too. https://www.thingiverse.com/thing:5894917 Go rate the original if you like it. They did a great job.
This is a vertical stand for a Dell OptiPlex micro 3070 PC. There are two designs, One with a holder for a SSD and one without. The USB SSD is 7mm in thickness, I use it for a backup device. This stand should also fit other Dell OptiPlex…
Under desk mount for a DELL OPTIPLEX 9020M (micro) Needed the desk space, so it had to be moved under the desk. Features: Lip to stop computer sliding out rear Computer case is recessed to stop from accidentally pressing power button 4 x…
OVERVIEW: While getting into the 10 inch home lab space, I opted for using a few Dell OptiPlex PCs from Ebay to run some of my services. Since the part is small and easy, I decided to make a replacement plate for the Jellyfin server! This…
This is a replaceable faceplate for your dell optiplex 5050 micro. I printed this on my BIQU B1.
I bought a used GPU for my arcade build at a price that I couldn't pass up. The only issue is that is was missing the Low Profile Bracket with it. Emblem Fits this Dell OptiPlex Case: Dell OptiPlex 9020 Small Form Factor (SFF) Tower This…
A caddy for your Dell DELL MZ60045 caddy: a caddy². It fits 3020 7020 9020 SFF PCs, and possibly others. This allows you to repurpose the optical drive slot on your Dell caddy, and mount a 2.5" SATA drive in its place. Drives clip in and…
Dell Optiplex 7060 Micro - Dual Screen and Post Bracket Mounted Bracket We got new PCs at work for the touchscreens. The existing brackets we had didn't fit, so rather than wait for management to organise new brackets (because the new PCs…
Mounted with double-sided tape. Cutout for cable management hole and 4 holes for velcro straps (for holding HDMI cable). Mounted 1 cm under HP logo (measured from bottom edge).
External power supplies can make a cable management mess. This is how I resolved this issue for my mini server's power supply, by attaching it to the computer. My method of attaching was strong double-sided tape. It's important to tape it…
ENGLISH description: Wanted to put my relatively big desktop computer off from my desk. So I made this wall mount. It is the width of dell optiplex 755. (93mm). But also usable for different computers of this size. Printing instructions:…
Warning this requires modifying the cables of the power supply. If you don't have knowledge with such things don't attempt this or do, I can't stop you. lab bench power supply internal measurements for max psu size Length 220mm width 84mm…
2.5" drive cage for Dell Precision / Optiplex computers ------------------------------------------------------------------------------------------ Ramka do dysku 2.5" pasująca do Komputerów Dell Precision / Optiplex
If you are using a non-original optical drive in your Dell Optiplex 7080 computer then this cap may be useful. You will need to print 2 pieces. After printing, cut off the support - see photo.
This is a SFX (NOT SFX-L) psu adapter to replace the stock psu on Dell Optiplex 3040, 3050, 7040, 7050 (that I know of) for Mini Tower only. Please take note. 1. The psu fan orientation upward or downward will depend on the 3 pin power…
Suggested to print standing up, no support, use brim Used 15% infill Wood Screws 6 x 1/2 https://www.amazon.com/dp/B0CZNC6KJB?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
I made this after going down one too many rabbit holes on how to make my rack more compact and hide the power brick. Here's the power brick I've designed this model around: https://www.amazon.com/dp/B0CLKD3N2G With the charger and…
A faceplate for your Dell OptiPlex PC. Model was derived and remixed from https://www.thingiverse.com/thing:3872654
🇩🇪 Über dieses Projekt Hier steckt Herzblut drin! Ich habe über 8 Stunden in die Entwicklung dieses Gehäuses investiert, um den langweiligen Dell OptiPlex Micro in ein echtes Designer-Stück zu verwandeln. Es ist kein einfacher Skin,…
easy to print mount for dell optiplex 780 usff Print with PLA 30% gryroid infill / ABS/PET-G 25% gyroid infill (i printed it with PLA) doesn't require supports Happy Printing :)
Tested in ABS and PLA for verifying the model shape Recommended to be printed in ABS, Petg or Pet PLA might be fine , if the HDD does not exceed 45 degrees Celsius 0.2 layer height
warning: power supply need modification to power 2 3.5 hdd do not use mini 6 pins to 2 sata power, this will kill a transistor on the motherboard. Instead you can use a 5v regulator to make 5v from the 12v (white cable on the big 6 pin…
Modified this for an Optiplex 7090, but it's fine for other models. A slot allows the use of a cable tie to block it; mine is hook-and-loop. There's also a hole for a fixing screw.
Da ich überraschend wenig Wandhalterungen für mein OptiPlex Modell gefunden habe, habe ich mir ein eigenes unauffälliges entworfen und in onshape konstruiert. Wird mit 4 kleinen Senkkopfschrauben festmontiert und sitzt recht straff drin…
Собираю свою домашнюю лабораторию из своих dell optiplex. Это самый сложный проект для меня. В качестве каркаса используется алюминиевый профиль 20х20 под паз 6, найденный где-то. Соблюдн стандарт передней панели, соответсвующий…
I used this in a project to mount an Intel Stock Cooler (originally designed for 1151) to a SFF Dell Optiplex motherboard. I used zip ties. It got the job done.
I was tasked with scrapping 2 old Dell OptiPlexes. Instead of binning all the parts, I set about reusing as many of them as possible. This model allows you to re-use the PSU in a standard computer case. Be aware that it may collide with…
This is a remix of the original "single_standard" model with pins to hold a ssd toollessly. STEP I recommend printing the model in place using the step file. The materials in the pictures are pctg for the caddy and tpu 95A for the pins.…
