19'' 1U Dell Optiplex Micro Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 19'' 1U Rack Mount - For most of the Dell Optiplex micro lineup. Read the description.
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 324
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
10/04/26 Update
Due to a few requests, I added a side-by-side version to hold 2 Optiplexes in a 1U rack.
Welcome!
While searching for a 19'' rack mount, I couldn't find any good models online that will work with my multiple different Dell Optiplex Models. Some models were a remix of a remix of a remix; they don't print correctly or can't be assembled with ease. So I made a full model myself that checks all the parameters I wanted.
Parameters
Need to be printed with ASA - So no complex geometry that will cause the design to warp or fail
Easy to assemble - needs to be assembled in multiple parts using cheap and easy hardware
NO GLUE - That was a huge thing - in case I need to disassemble it and move stuff around
Thread Inserts - good mechanical connection - can assemble and disassemble multiple times and torque the screws correctly.
What Models Should it Support?
This rack stand design should work with most Optiplex micros.
3020M / 9020M / 3040 / 7040
3050 / 5050 / 7050
3060 / 5060 / 7060
3070 / 5070 / 7070
3080 / 5080 / 7080 / 7080 XE
3090 / 5090 / 7090
3000 / 5000 / 7000 / 7000 XE
7010 / 7010 Plus
7020 / 7020 Plus
Dell Pro Micro / Micro Plus
If it doesn't work with your model, let me know, and I'll try to modify the design for you!
What do we need for this Dock?
Print Settings
Material: PETG or Above (I used ASA)
Nozzle Size: 0.4mm
Layer Height: 0.2mm
Vertical Walls: 3
Infill: 25%
Supports: YES
Assembly Instructions (Step-By-Step)
Make sure you have all the needed 3d printed parts
Start by pressing the 2 threaded inserts into the main body of the rack
Next, press the last 4 threaded inserts into the arm (in the image, you see 2, but you need to press all 4).
Slide the 4 screws into the main body part (you see 2, but you should have 4 screws)
screw in the two parts together, tighten everything in a star pattern, and make sure both the main body and arm parts are flush together.
If needed, the cutout hole lets you slide in a screwdriver; that way, you dont need a huge screwdriver and can screw it in with ease.
Remove the feet from the Optiplex
Slide the Optiplex into the main body of the rack mount
Take the top panel and screw it in using the 2 M3X5mm screws. Align the thin part of the bezel with the thumb screw that some Optiplex versions have. That will lock the Optiplex in place.
AND that's it! Slide everything into your server rack and enjoy!
Hope you like this design, and if you make it, don't forget to post a make :)
