1 / 7

DELL OptiPlex MFF (Micro) support

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wall support for DELL Optiplex micro-pc

Aktualizacja u źródła: 17 paź 2023

Informacje o modelu

In my case it's an Optiplex 3020, but it's fine for other models.

Print made in PETG with 100% infill; 2 washers are needed so as not to strain the plastic.

Fixed to the wall with 2 wall-plug/anchor (6mm).

A slot allows the use of a cable tie to block it; mine is hook-and-loop.
There's also a hole for a fixing screw.

The "Optiplex-Block" is not strictly necessary - it's for more security; for this a wall-plug of 5mm is sufficient.

I Paint It Black (quoted)

Edit:
After 6 months, the upper block broke: I modified it slightly.