Dell Optiplex 5070 Micro 10" rack mount + brick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket to mount a Dell Optiplex 5070 Micro with the power brick.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this after going down one too many rabbit holes on how to make my rack more compact and hide the power brick.
Here's the power brick I've designed this model around:
https://www.amazon.com/dp/B0CLKD3N2G
With the charger and Optiplex installed, the unit becomes slightly wider than what'll normally fit in the width of a 10" rack. The way I installed this was to insert it into the rack at a 45 degree angle, then rotate it once it clears the rack rails.
Because of this, you lose the functionality of easily removing the unit from the rack. But since you gain additional space with the integrated power brick, I think the tradeoff is worth it!
Optionally, i'm also using some 1-ft NEMA 5-15P to IEC-60320-C5 cables to minimize cable runs.
I also cut the power adapter wire by about a foot and re-spliced it so that the cable is much shorter.